Daily Papers

Target-speaker speech processing (TS) tasks, such as target-speaker automatic speech recognition (TS-ASR), target speech extraction (TSE), and personal voice activity detection (p-VAD), are important for extracting information about a desired speaker's speech even when it is corrupted by interfering speakers. While most studies have focused on training schemes or system architectures for each specific task, the auxiliary network for embedding target-speaker cues has not been investigated comprehensively in a unified cross-task evaluation. Therefore, this paper aims to address a fundamental question: what is the preferred speaker embedding for TS tasks? To this end, for the TS-ASR, TSE, and p-VAD tasks, we compare pre-trained speaker encoders (i.e., self-supervised or speaker recognition models) that compute speaker embeddings from pre-recorded enrollment speech of the target speaker with ideal speaker embeddings derived directly from the target speaker's identity in the form of a one-hot vector. To further understand the properties of ideal speaker embedding, we optimize it using a gradient-based approach to improve performance on the TS task. Our analysis reveals that speaker verification performance is somewhat unrelated to TS task performances, the one-hot vector outperforms enrollment-based ones, and the optimal embedding depends on the input mixture.

Recently, synthesizing personalized speech by text-to-speech (TTS) application is highly demanded. But the previous TTS models require a mass of target speaker speeches for training. It is a high-cost task, and hard to record lots of utterances from the target speaker. Data augmentation of the speeches is a solution but leads to the low-quality synthesis speech problem. Some multi-speaker TTS models are proposed to address the issue. But the quantity of utterances of each speaker imbalance leads to the voice similarity problem. We propose the Target Domain Adaptation Speech Synthesis Network (TDASS) to address these issues. Based on the backbone of the Tacotron2 model, which is the high-quality TTS model, TDASS introduces a self-interested classifier for reducing the non-target influence. Besides, a special gradient reversal layer with different operations for target and non-target is added to the classifier. We evaluate the model on a Chinese speech corpus, the experiments show the proposed method outperforms the baseline method in terms of voice quality and voice similarity.

We introduce target-speaker unlearning ASR (TSU-ASR) task in a fully end-to-end framework for multi-speaker ASR and diarization. Given a multi-speaker utterance and a set of opt-out speakers who do not wish to have their speech transcribed, the task requires an ASR system to transcribe all speakers except the opt-out ones, while still indicating when those speakers are active. As a first step towards tackling this task, we introduce a novel, light-weight Enrollment-Conditioned Gating (ECG) module attachable to a frozen dual-stream speech LLM that enables ASR for new opt-out speakers dynamically during inference, even those who were not seen during initial ECG training phase. Our experiments on both AMI (English) and AliMeeting (Mandarin) datasets show that speech transcription accuracy for corresponding opt-out words or characters falls from 72.3% to 48.2% and from 73.6% to 27.3%, respectively, while retained speakers' transcription error rates maintain more or less the same. Our approach provides a practical solution for modern video conferencing platforms, allowing speakers to dynamically opt-out from automated AI transcriptions without forcefully leaving the meeting sessions, enabling a privacy-preserving interface for potentially millions of online meetings daily.

Target speaker extraction aims to separate the voice of a specific speaker from mixed speech. Traditionally, this process has relied on extracting a speaker embedding from a reference speech, in which a speaker recognition model is required. However, identifying an appropriate speaker recognition model can be challenging, and using the target speaker embedding as reference information may not be optimal for target speaker extraction tasks. This paper introduces a Universal Speaker Embedding-Free Target Speaker Extraction (USEF-TSE) framework that operates without relying on speaker embeddings. USEF-TSE utilizes a multi-head cross-attention mechanism as a frame-level target speaker feature extractor. This innovative approach allows mainstream speaker extraction solutions to bypass the dependency on speaker recognition models and better leverage the information available in the enrollment speech, including speaker characteristics and contextual details. Additionally, USEF-TSE can seamlessly integrate with other time-domain or time-frequency domain speech separation models to achieve effective speaker extraction. Experimental results show that our proposed method achieves state-of-the-art (SOTA) performance in terms of Scale-Invariant Signal-to-Distortion Ratio (SI-SDR) on the WSJ0-2mix, WHAM!, and WHAMR! datasets, which are standard benchmarks for monaural anechoic, noisy and noisy-reverberant two-speaker speech separation and speaker extraction. The results on the LibriMix and the blind test set of the ICASSP 2023 DNS Challenge demonstrate that the model performs well on more diverse and out-of-domain data. For access to the source code, please visit: https://github.com/ZBang/USEF-TSE.

In this paper, we propose "personal VAD", a system to detect the voice activity of a target speaker at the frame level. This system is useful for gating the inputs to a streaming on-device speech recognition system, such that it only triggers for the target user, which helps reduce the computational cost and battery consumption, especially in scenarios where a keyword detector is unpreferable. We achieve this by training a VAD-alike neural network that is conditioned on the target speaker embedding or the speaker verification score. For each frame, personal VAD outputs the probabilities for three classes: non-speech, target speaker speech, and non-target speaker speech. Under our optimal setup, we are able to train a model with only 130K parameters that outperforms a baseline system where individually trained standard VAD and speaker recognition networks are combined to perform the same task.

Target Speaker Automatic Speech Recognition (TS-ASR) aims to transcribe the speech of a specified target speaker from multi-speaker mixtures in cocktail party scenarios. Recent advancement of Large Audio-Language Models (LALMs) has already brought some new insights to TS-ASR. However, significant room for optimization remains for the TS-ASR task within the LALMs architecture. While Chain of Thoughts (CoT) and Reinforcement Learning (RL) have proven effective in certain speech tasks, TS-ASR, which requires the model to deeply comprehend speech signals, differentiate various speakers, and handle overlapping utterances is particularly well-suited to a reasoning-guided approach. Therefore, we propose a novel framework that incorporates CoT and RL training into TS-ASR for performance improvement. A novel CoT dataset of TS-ASR is constructed, and the TS-ASR model is first trained on regular data and then fine-tuned on CoT data. Finally, the model is further trained with RL using selected data to enhance generalized reasoning capabilities. Experiment results show a significant improvement of TS-ASR performance with CoT and RL training, which demonstrates the effectiveness of the proposed CoT and RL training methods adapted for the TS-ASR task.

Speaker-attributed automatic speech recognition (ASR) in multi-speaker environments remains a significant challenge, particularly when systems conditioned on speaker embeddings fail to generalize to unseen speakers. In this work, we propose Diarization-Conditioned Whisper (DiCoW), a novel approach to target-speaker ASR that leverages speaker diarization outputs as conditioning information. DiCoW extends the pre-trained Whisper model by integrating diarization labels directly, eliminating reliance on speaker embeddings and reducing the need for extensive speaker-specific training data. Our method introduces frame-level diarization-dependent transformations (FDDT) and query-key biasing (QKb) techniques to refine the model's focus on target speakers while effectively handling overlapping speech. By leveraging diarization outputs as conditioning signals, DiCoW simplifies the workflow for multi-speaker ASR, improves generalization to unseen speakers and enables more reliable transcription in real-world multi-speaker recordings. Additionally, we explore the integration of a connectionist temporal classification (CTC) head to Whisper and demonstrate its ability to improve transcription efficiency through hybrid decoding. Notably, we show that our approach is not limited to Whisper; it also provides similar benefits when applied to the Branchformer model. We validate DiCoW on real-world datasets, including AMI and NOTSOFAR-1 from CHiME-8 challenge, as well as synthetic benchmarks such as Libri2Mix and LibriCSS, enabling direct comparisons with previous methods. Results demonstrate that DiCoW enhances the model's target-speaker ASR capabilities while maintaining Whisper's accuracy and robustness on single-speaker data.

We propose CONF-TSASR, a non-autoregressive end-to-end time-frequency domain architecture for single-channel target-speaker automatic speech recognition (TS-ASR). The model consists of a TitaNet based speaker embedding module, a Conformer based masking as well as ASR modules. These modules are jointly optimized to transcribe a target-speaker, while ignoring speech from other speakers. For training we use Connectionist Temporal Classification (CTC) loss and introduce a scale-invariant spectrogram reconstruction loss to encourage the model better separate the target-speaker's spectrogram from mixture. We obtain state-of-the-art target-speaker word error rate (TS-WER) on WSJ0-2mix-extr (4.2%). Further, we report for the first time TS-WER on WSJ0-3mix-extr (12.4%), LibriSpeech2Mix (4.2%) and LibriSpeech3Mix (7.6%) datasets, establishing new benchmarks for TS-ASR. The proposed model will be open-sourced through NVIDIA NeMo toolkit.

Target speaker extraction (TSE) aims to isolate a specific speaker's speech from a mixture using speaker enrollment as a reference. While most existing approaches are discriminative, recent generative methods for TSE achieve strong results. However, generative methods for TSE remain underexplored, with most existing approaches relying on complex pipelines and pretrained components, leading to computational overhead. In this work, we present FlowTSE, a simple yet effective TSE approach based on conditional flow matching. Our model receives an enrollment audio sample and a mixed speech signal, both represented as mel-spectrograms, with the objective of extracting the target speaker's clean speech. Furthermore, for tasks where phase reconstruction is crucial, we propose a novel vocoder conditioned on the complex STFT of the mixed signal, enabling improved phase estimation. Experimental results on standard TSE benchmarks show that FlowTSE matches or outperforms strong baselines.

Conventional speech enhancement (SE) aims to improve speech perception and intelligibility by suppressing noise without requiring enrollment speech as reference, whereas personalized SE (PSE) addresses the cocktail party problem by extracting a target speaker's speech using enrollment speech. While these two tasks tackle different yet complementary challenges in speech signal processing, they often share similar model architectures, with PSE incorporating an additional branch to process enrollment speech. This suggests developing a unified model capable of efficiently handling both SE and PSE tasks, thereby simplifying deployment while maintaining high performance. However, PSE performance is sensitive to variations in enrollment speech, like emotional tone, which limits robustness in real-world applications. To address these challenges, we propose two novel models, USEF-PNet and DSEF-PNet, both extending our previous SEF-PNet framework. USEF-PNet introduces a unified architecture for processing enrollment speech, integrating SE and PSE into a single framework to enhance performance and streamline deployment. Meanwhile, DSEF-PNet incorporates an unsupervised speech disentanglement approach by pairing a mixture speech with two different enrollment utterances and enforcing consistency in the extracted target speech. This strategy effectively isolates high-quality speaker identity information from enrollment speech, reducing interference from factors such as emotion and content, thereby improving PSE robustness. Additionally, we explore a long-short enrollment pairing (LSEP) strategy to examine the impact of enrollment speech duration during both training and evaluation. Extensive experiments on the Libri2Mix and VoiceBank DEMAND demonstrate that our proposed USEF-PNet, DSEF-PNet all achieve substantial performance improvements, with random enrollment duration performing slightly better.

Self-supervised learning (SSL) is standard for speech representation learning, but mainstream models are designed around single-speaker audio, limiting their usefulness in multi-speakers scenarios. We present SepRQ, an open-source SSL framework that replaces masked prediction with a pseudo-source-separation objective over frozen random-projection codebooks. By adopting a novel mask-free, multiresolution approach, SepRQ achieves state-of-the-art performance in Speaker Diarization and Speech Separation on the SUPERB benchmark, surpassing WavLM and other cocktail-party derived SSLs at both Base and Large scales, while requiring only 85.68M inference parameters. SepRQ also demonstrates strong performance across target-speaker tasks requiring enrollment (such as Target-Speaker Automatic Speech Recognition), and on the challenging multi-domain DIHARD 3 diarization dataset. Notably, we report strong separation capabilities on three-speaker mixtures (WSJ0-3Mix), where current SSL literature struggles. While cocktail-party SSLs remain scarce and closed-source, limited to C-HuBERT and the enrollment-based SA-WavLM, we open-source SepRQ to the community.

Recognizing whispered speech and converting it to normal speech creates many possibilities for speech interaction. Because the sound pressure of whispered speech is significantly lower than that of normal speech, it can be used as a semi-silent speech interaction in public places without being audible to others. Converting whispers to normal speech also improves the speech quality for people with speech or hearing impairments. However, conventional speech conversion techniques do not provide sufficient conversion quality or require speaker-dependent datasets consisting of pairs of whispered and normal speech utterances. To address these problems, we propose WESPER, a zero-shot, real-time whisper-to-normal speech conversion mechanism based on self-supervised learning. WESPER consists of a speech-to-unit (STU) encoder, which generates hidden speech units common to both whispered and normal speech, and a unit-to-speech (UTS) decoder, which reconstructs speech from the encoded speech units. Unlike the existing methods, this conversion is user-independent and does not require a paired dataset for whispered and normal speech. The UTS decoder can reconstruct speech in any target speaker's voice from speech units, and it requires only an unlabeled target speaker's speech data. We confirmed that the quality of the speech converted from a whisper was improved while preserving its natural prosody. Additionally, we confirmed the effectiveness of the proposed approach to perform speech reconstruction for people with speech or hearing disabilities. (project page: http://lab.rekimoto.org/projects/wesper )

We propose a self-speaker adaptation method for streaming multi-talker automatic speech recognition (ASR) that eliminates the need for explicit speaker queries. Unlike conventional approaches requiring target speaker embeddings or enrollment audio, our technique dynamically adapts individual ASR instances through speaker-wise speech activity prediction. The key innovation involves injecting speaker-specific kernels generated via speaker supervision activations into selected ASR encoder layers. This enables instantaneous speaker adaptation to target speakers while handling fully overlapped speech even in a streaming scenario. Experiments show state-of-the-art performance in both offline and streaming scenarios, demonstrating that our self-adaptive method effectively addresses severe speech overlap through streamlined speaker-focused recognition. The results validate the proposed self-speaker adaptation approach as a robust solution for multi-talker ASR under severe overlapping speech conditions.

In this work, we propose a novel method for modeling numerous speakers, which enables expressing the overall characteristics of speakers in detail like a trained multi-speaker model without additional training on the target speaker's dataset. Although various works with similar purposes have been actively studied, their performance has not yet reached that of trained multi-speaker models due to their fundamental limitations. To overcome previous limitations, we propose effective methods for feature learning and representing target speakers' speech characteristics by discretizing the features and conditioning them to a speech synthesis model. Our method obtained a significantly higher similarity mean opinion score (SMOS) in subjective similarity evaluation than seen speakers of a high-performance multi-speaker model, even with unseen speakers. The proposed method also outperforms a zero-shot method by significant margins. Furthermore, our method shows remarkable performance in generating new artificial speakers. In addition, we demonstrate that the encoded latent features are sufficiently informative to reconstruct an original speaker's speech completely. It implies that our method can be used as a general methodology to encode and reconstruct speakers' characteristics in various tasks.

Adapting generic speech recognition models to specific individuals is a challenging problem due to the scarcity of personalized data. Recent works have proposed boosting the amount of training data using personalized text-to-speech synthesis. Here, we ask two fundamental questions about this strategy: when is synthetic data effective for personalization, and why is it effective in those cases? To address the first question, we adapt a state-of-the-art automatic speech recognition (ASR) model to target speakers from four benchmark datasets representative of different speaker types. We show that ASR personalization with synthetic data is effective in all cases, but particularly when (i) the target speaker is underrepresented in the global data, and (ii) the capacity of the global model is limited. To address the second question of why personalized synthetic data is effective, we use controllable speech synthesis to generate speech with varied styles and content. Surprisingly, we find that the text content of the synthetic data, rather than style, is important for speaker adaptation. These results lead us to propose a data selection strategy for ASR personalization based on speech content.

We present a textless speech-to-speech translation (S2ST) system that can translate speech from one language into another language and can be built without the need of any text data. Different from existing work in the literature, we tackle the challenge in modeling multi-speaker target speech and train the systems with real-world S2ST data. The key to our approach is a self-supervised unit-based speech normalization technique, which finetunes a pre-trained speech encoder with paired audios from multiple speakers and a single reference speaker to reduce the variations due to accents, while preserving the lexical content. With only 10 minutes of paired data for speech normalization, we obtain on average 3.2 BLEU gain when training the S2ST model on the VoxPopuli S2ST dataset, compared to a baseline trained on un-normalized speech target. We also incorporate automatically mined S2ST data and show an additional 2.0 BLEU gain. To our knowledge, we are the first to establish a textless S2ST technique that can be trained with real-world data and works for multiple language pairs. Audio samples are available at https://facebookresearch.github.io/speech_translation/textless_s2st_real_data/index.html .

Custom voice, a specific text to speech (TTS) service in commercial speech platforms, aims to adapt a source TTS model to synthesize personal voice for a target speaker using few speech data. Custom voice presents two unique challenges for TTS adaptation: 1) to support diverse customers, the adaptation model needs to handle diverse acoustic conditions that could be very different from source speech data, and 2) to support a large number of customers, the adaptation parameters need to be small enough for each target speaker to reduce memory usage while maintaining high voice quality. In this work, we propose AdaSpeech, an adaptive TTS system for high-quality and efficient customization of new voices. We design several techniques in AdaSpeech to address the two challenges in custom voice: 1) To handle different acoustic conditions, we use two acoustic encoders to extract an utterance-level vector and a sequence of phoneme-level vectors from the target speech during training; in inference, we extract the utterance-level vector from a reference speech and use an acoustic predictor to predict the phoneme-level vectors. 2) To better trade off the adaptation parameters and voice quality, we introduce conditional layer normalization in the mel-spectrogram decoder of AdaSpeech, and fine-tune this part in addition to speaker embedding for adaptation. We pre-train the source TTS model on LibriTTS datasets and fine-tune it on VCTK and LJSpeech datasets (with different acoustic conditions from LibriTTS) with few adaptation data, e.g., 20 sentences, about 1 minute speech. Experiment results show that AdaSpeech achieves much better adaptation quality than baseline methods, with only about 5K specific parameters for each speaker, which demonstrates its effectiveness for custom voice. Audio samples are available at https://speechresearch.github.io/adaspeech/.

The development of neural audio codecs (NACs) has largely promoted applications of language models (LMs) to speech processing and understanding. However, there lacks the verification on the effectiveness of autoregressive (AR) LMbased models in unifying different sub-tasks of speech enhancement (SE). In this work, we propose UniSE, a unified decoder-only LM-based framework to handle different SE tasks including speech restoration, target speaker extraction and speech separation. It takes input speech features as conditions and generates discrete tokens of the target speech using AR modeling, which facilitates a compatibility between distinct learning patterns of multiple tasks. Experiments on several benchmarks indicate the proposed UniSE can achieve competitive performance compared to discriminative and generative baselines, showing the capacity of LMs in unifying SE tasks. The demo page is available here: https://github.com/hyyan2k/UniSE.

Whispered speech lacks vocal-fold excitation and exhibits reduced energy and shifted formant frequencies, making natural and intelligible voice reconstruction highly challenging. To address this issue, we propose WhisperVC, a three-stage framework for Mandarin whisper-to-speech (W2S) conversion. Stage~1 employs a fine-tuned Content Encoder based on the OpenAI Whisper-large~V3 model and a Conformer-based variational autoencoder with soft-DTW alignment to learn domain-invariant and temporally consistent representations. Stage~2 introduces a deterministic Length--Channel Aligner and a duration-free FastSpeech~2 model conditioned on speaker embeddings for controllable timbre and stable prosody. Stage~3 fine-tunes a HiFi-GAN vocoder on predicted mel-spectrograms to synthesize high-fidelity waveforms. Experiments on the AISHELL6-Whisper corpus demonstrate that WhisperVC achieves near ground-truth quality (DNSMOS~3.11, UTMOS~2.52, CER~18.67\%), while maintaining speaker similarity (cosine~0.76) and robust performance under whisper-only inference.

A voice agent's speech recognizer transcribes everyone near the microphone, including people other than the caller. I fine-tuned a public causal target-speaker extraction model (REAL-TSE, 27M parameters) on one GPU to work from a voice sample cut from the call itself, and released it as VoxLock. I score it by what a recognizer writes on real recordings. On Krisp's 265-recording benchmark it reaches 4.95% WER against 23.21% unprocessed and lets 9 background words into the transcript over 85 minutes of background-only speech. Its WER is not significantly different from Krisp's best filters and is significantly lower than the other commercial and open systems I tested. On 400 AMI meeting windows built and frozen before scoring, it cuts WER from 42.95% to 10.63%. The 8-bit model runs a live call on 77% of one CPU thread with 24 ms of algorithmic latency. Model, code and per-file scores are open.

Target Speech Extraction (TSE) aims to isolate a target speaker's voice from a mixture of multiple speakers by leveraging speaker-specific cues, typically provided as auxiliary audio (a.k.a. cue audio). Although recent advancements in TSE have primarily employed discriminative models that offer high perceptual quality, these models often introduce unwanted artifacts, reduce naturalness, and are sensitive to discrepancies between training and testing environments. On the other hand, generative models for TSE lag in perceptual quality and intelligibility. To address these challenges, we present SoloSpeech, a novel cascaded generative pipeline that integrates compression, extraction, reconstruction, and correction processes. SoloSpeech features a speaker-embedding-free target extractor that utilizes conditional information from the cue audio's latent space, aligning it with the mixture audio's latent space to prevent mismatches. Evaluated on the widely-used Libri2Mix dataset, SoloSpeech achieves the new state-of-the-art intelligibility and quality in target speech extraction and speech separation tasks while demonstrating exceptional generalization on out-of-domain data and real-world scenarios.

We introduce the REAL-TSE Challenge, an IEEE SLT 2026 satellite challenge on target speaker extraction~(TSE) from real conversational recordings. Given a multi-speaker mixture and one or more enrollment utterances from a target speaker, participating systems must recover only the target speech. Unlike simulated read-speech benchmarks, REAL-TSE evaluates Mandarin and English recordings that contain natural overlap, reverberation, noise, channel mismatch, and conversational dynamics. The challenge defines two complementary tracks: an Online track for low-latency streaming extraction and an Offline track for full-context processing. Systems are evaluated with Token Error Rate (TER), Speaker Similarity (SpkSim), DNSMOS, and target-speaker activity F1. This overview paper describes the task definition, datasets, baselines, evaluation protocol, submitted systems, condition-wise findings, and lessons for future real-world TSE benchmarks.

We propose LauraTSE, an Auto-Regressive Decoder-Only Language Model for Target Speaker Extraction built upon the LauraGPT backbone. LauraTSE employs a small-scale auto-regressive decoder-only language model that generates the initial layers of the target speech's discrete codec representations from the continuous embeddings of both the mixture and reference speech. These outputs serve as coarse-grained predictions. To refine them, a one-step encoder-only language model reconstructs the full codec representation by integrating information from both the mixture and the reference speech, adding fine-grained details. Experimental results show that our approach can achieve promising performance. Additionally, we conduct ablation studies to investigate the data scalability and the contribution of the encoder-only model.

Training target speaker extraction (TSE) models for real conversational mixtures remains challenging because large-scale training corpora and clean target speech for supervision are unavailable. We present PS4, a proxy-supervised training framework for TSE in real conversational mixtures, with two main contributions. First, we construct a large-scale corpus of 71,771 training samples derived from four public datasets, covering both Chinese and English scenarios. Each sample contains an overlapping speech mixture, per-speaker enrollment audio, a ground-truth transcript, and frame-level voice activity labels. Second, we propose a proxy-supervised joint training strategy that fine-tunes a BSRNN-based TSE model using four complementary differentiable objectives: ASR cross-entropy, speaker similarity, frame-level voice activity detection, and perceptual audio quality. Starting from a publicly available pre-trained checkpoint, only the BSRNN separator is updated during fine-tuning. On the REAL-T challenge leaderboard, PS4 ranks 2nd overall, achieving the best speaker similarity and timing F1 among all submitted systems.

In crowded settings, the human brain can focus on speech from a target speaker, given prior knowledge of how they sound. We introduce a novel intelligent hearable system that achieves this capability, enabling target speech hearing to ignore all interfering speech and noise, but the target speaker. A naive approach is to require a clean speech example to enroll the target speaker. This is however not well aligned with the hearable application domain since obtaining a clean example is challenging in real world scenarios, creating a unique user interface problem. We present the first enrollment interface where the wearer looks at the target speaker for a few seconds to capture a single, short, highly noisy, binaural example of the target speaker. This noisy example is used for enrollment and subsequent speech extraction in the presence of interfering speakers and noise. Our system achieves a signal quality improvement of 7.01 dB using less than 5 seconds of noisy enrollment audio and can process 8 ms of audio chunks in 6.24 ms on an embedded CPU. Our user studies demonstrate generalization to real-world static and mobile speakers in previously unseen indoor and outdoor multipath environments. Finally, our enrollment interface for noisy examples does not cause performance degradation compared to clean examples, while being convenient and user-friendly. Taking a step back, this paper takes an important step towards enhancing the human auditory perception with artificial intelligence. We provide code and data at: https://github.com/vb000/LookOnceToHear.

With rapid progress in neural text-to-speech (TTS) models, personalized speech generation is now in high demand for many applications. For practical applicability, a TTS model should generate high-quality speech with only a few audio samples from the given speaker, that are also short in length. However, existing methods either require to fine-tune the model or achieve low adaptation quality without fine-tuning. In this work, we propose StyleSpeech, a new TTS model which not only synthesizes high-quality speech but also effectively adapts to new speakers. Specifically, we propose Style-Adaptive Layer Normalization (SALN) which aligns gain and bias of the text input according to the style extracted from a reference speech audio. With SALN, our model effectively synthesizes speech in the style of the target speaker even from single speech audio. Furthermore, to enhance StyleSpeech's adaptation to speech from new speakers, we extend it to Meta-StyleSpeech by introducing two discriminators trained with style prototypes, and performing episodic training. The experimental results show that our models generate high-quality speech which accurately follows the speaker's voice with single short-duration (1-3 sec) speech audio, significantly outperforming baselines.

We describe a neural network-based system for text-to-speech (TTS) synthesis that is able to generate speech audio in the voice of many different speakers, including those unseen during training. Our system consists of three independently trained components: (1) a speaker encoder network, trained on a speaker verification task using an independent dataset of noisy speech from thousands of speakers without transcripts, to generate a fixed-dimensional embedding vector from seconds of reference speech from a target speaker; (2) a sequence-to-sequence synthesis network based on Tacotron 2, which generates a mel spectrogram from text, conditioned on the speaker embedding; (3) an auto-regressive WaveNet-based vocoder that converts the mel spectrogram into a sequence of time domain waveform samples. We demonstrate that the proposed model is able to transfer the knowledge of speaker variability learned by the discriminatively-trained speaker encoder to the new task, and is able to synthesize natural speech from speakers that were not seen during training. We quantify the importance of training the speaker encoder on a large and diverse speaker set in order to obtain the best generalization performance. Finally, we show that randomly sampled speaker embeddings can be used to synthesize speech in the voice of novel speakers dissimilar from those used in training, indicating that the model has learned a high quality speaker representation.

Although high-fidelity speech can be obtained for intralingual speech synthesis, cross-lingual text-to-speech (CTTS) is still far from satisfactory as it is difficult to accurately retain the speaker timbres(i.e. speaker similarity) and eliminate the accents from their first language(i.e. nativeness). In this paper, we demonstrated that vector-quantized(VQ) acoustic feature contains less speaker information than mel-spectrogram. Based on this finding, we propose a novel dual speaker embedding TTS (DSE-TTS) framework for CTTS with authentic speaking style. Here, one embedding is fed to the acoustic model to learn the linguistic speaking style, while the other one is integrated into the vocoder to mimic the target speaker's timbre. Experiments show that by combining both embeddings, DSE-TTS significantly outperforms the state-of-the-art SANE-TTS in cross-lingual synthesis, especially in terms of nativeness.

In this paper, we experimented with the SpeechT5 model pre-trained on large-scale datasets. We pre-trained the foundation model from scratch and fine-tuned it on a large-scale robust multi-speaker text-to-speech (TTS) task. We tested the model capabilities in a zero- and few-shot scenario. Based on two listening tests, we evaluated the synthetic audio quality and the similarity of how synthetic voices resemble real voices. Our results showed that the SpeechT5 model can generate a synthetic voice for any speaker using only one minute of the target speaker's data. We successfully demonstrated the high quality and similarity of our synthetic voices on publicly known Czech politicians and celebrities.

Audio-Visual Target Speaker Extraction (AV-TSE) aims to mimic the human ability to enhance auditory perception using visual cues. Although numerous models have been proposed recently, most of them estimate target signals by primarily relying on local dependencies within acoustic features, underutilizing the human-like capacity to infer unclear parts of speech through contextual information. This limitation results in not only suboptimal performance but also inconsistent extraction quality across the utterance, with some segments exhibiting poor quality or inadequate suppression of interfering speakers. To close this gap, we propose a model-agnostic strategy called the Mask-And-Recover (MAR). It integrates both inter- and intra-modality contextual correlations to enable global inference within extraction modules. Additionally, to better target challenging parts within each sample, we introduce a Fine-grained Confidence Score (FCS) model to assess extraction quality and guide extraction modules to emphasize improvement on low-quality segments. To validate the effectiveness of our proposed model-agnostic training paradigm, six popular AV-TSE backbones were adopted for evaluation on the VoxCeleb2 dataset, demonstrating consistent performance improvements across various metrics.

Cross-speaker emotion intensity control aims to generate emotional speech of a target speaker with desired emotion intensities using only their neutral speech. A recently proposed method, emotion arithmetic, achieves emotion intensity control using a single-speaker emotion vector. Although this prior method has shown promising results in the same-speaker setting, it lost speaker consistency in the cross-speaker setting due to mismatches between the emotion vector of the source and target speakers. To overcome this limitation, we propose a speaker-agnostic emotion vector designed to capture shared emotional expressions across multiple speakers. This speaker-agnostic emotion vector is applicable to arbitrary speakers. Experimental results demonstrate that the proposed method succeeds in cross-speaker emotion intensity control while maintaining speaker consistency, speech quality, and controllability, even in the unseen speaker case.

This paper proposes a generative pretraining foundation model for high-quality speech restoration tasks. By directly operating on complex-valued short-time Fourier transform coefficients, our model does not rely on any vocoders for time-domain signal reconstruction. As a result, our model simplifies the synthesis process and removes the quality upper-bound introduced by any mel-spectrogram vocoder compared to prior work SpeechFlow. The proposed method is evaluated on multiple speech restoration tasks, including speech denoising, bandwidth extension, codec artifact removal, and target speaker extraction. In all scenarios, finetuning our pretrained model results in superior performance over strong baselines. Notably, in the target speaker extraction task, our model outperforms existing systems, including those leveraging SSL-pretrained encoders like WavLM. The code and the pretrained checkpoints are publicly available in the NVIDIA NeMo framework.

Zero-shot voice conversion (VC) aims to transfer the source speaker timbre to arbitrary unseen target speaker timbre, while keeping the linguistic content unchanged. Although the voice of generated speech can be controlled by providing the speaker embedding of the target speaker, the speaker similarity still lags behind the ground truth recordings. In this paper, we propose SEF-VC, a speaker embedding free voice conversion model, which is designed to learn and incorporate speaker timbre from reference speech via a powerful position-agnostic cross-attention mechanism, and then reconstruct waveform from HuBERT semantic tokens in a non-autoregressive manner. The concise design of SEF-VC enhances its training stability and voice conversion performance. Objective and subjective evaluations demonstrate the superiority of SEF-VC to generate high-quality speech with better similarity to target reference than strong zero-shot VC baselines, even for very short reference speeches.

Studies have shown that in noisy acoustic environments, providing binaural signals to the user of an assistive listening device may improve speech intelligibility and spatial awareness. This paper presents a binaural speech enhancement method using a complex convolutional neural network with an encoder-decoder architecture and a complex multi-head attention transformer. The model is trained to estimate individual complex ratio masks in the time-frequency domain for the left and right-ear channels of binaural hearing devices. The model is trained using a novel loss function that incorporates the preservation of spatial information along with speech intelligibility improvement and noise reduction. Simulation results for acoustic scenarios with a single target speaker and isotropic noise of various types show that the proposed method improves the estimated binaural speech intelligibility and preserves the binaural cues better in comparison with several baseline algorithms.

We explore cross-lingual multi-speaker speech synthesis and cross-lingual voice conversion applied to data augmentation for automatic speech recognition (ASR) systems. Through extensive experiments, we show that our approach permits the application of speech synthesis and voice conversion to improve ASR systems on a target language using only one target-language speaker during model training. We managed to close the gap between ASR models trained with synthesized versus human speech compared to other works that use many speakers. Finally, we show that it is possible to obtain promising ASR training results with our data augmentation method using only a single real speaker in a target language.

Personalised speech enhancement (PSE), which extracts only the speech of a target user and removes everything else from a recorded audio clip, can potentially improve users' experiences of audio AI modules deployed in the wild. To support a large variety of downstream audio tasks, such as real-time ASR and audio-call enhancement, a PSE solution should operate in a streaming mode, i.e., input audio cleaning should happen in real-time with a small latency and real-time factor. Personalisation is typically achieved by extracting a target speaker's voice profile from an enrolment audio, in the form of a static embedding vector, and then using it to condition the output of a PSE model. However, a fixed target speaker embedding may not be optimal under all conditions. In this work, we present a streaming Transformer-based PSE model and propose a novel cross-attention approach that gives adaptive target speaker representations. We present extensive experiments and show that our proposed cross-attention approach outperforms competitive baselines consistently, even when our model is only approximately half the size.

Building text-to-speech (TTS) synthesisers for Indian languages is a difficult task owing to a large number of active languages. Indian languages can be classified into a finite set of families, prominent among them, Indo-Aryan and Dravidian. The proposed work exploits this property to build a generic TTS system using multiple languages from the same family in an end-to-end framework. Generic systems are quite robust as they are capable of capturing a variety of phonotactics across languages. These systems are then adapted to a new language in the same family using small amounts of adaptation data. Experiments indicate that good quality TTS systems can be built using only 7 minutes of adaptation data. An average degradation mean opinion score of 3.98 is obtained for the adapted TTSes. Extensive analysis of systematic interactions between languages in the generic TTSes is carried out. x-vectors are included as speaker embedding to synthesise text in a particular speaker's voice. An interesting observation is that the prosody of the target speaker's voice is preserved. These results are quite promising as they indicate the capability of generic TTSes to handle speaker and language switching seamlessly, along with the ease of adaptation to a new language.

While autoregressive speech token generation models produce speech with remarkable variety and naturalness, their inherent lack of controllability often results in issues such as hallucinations and undesired vocalizations that do not conform to conditioning inputs. We introduce Koel-TTS, a suite of enhanced encoder-decoder Transformer TTS models that address these challenges by incorporating preference alignment techniques guided by automatic speech recognition and speaker verification models. Additionally, we incorporate classifier-free guidance to further improve synthesis adherence to the transcript and reference speaker audio. Our experiments demonstrate that these optimizations significantly enhance target speaker similarity, intelligibility, and naturalness of synthesized speech. Notably, Koel-TTS directly maps text and context audio to acoustic tokens, and on the aforementioned metrics, outperforms state-of-the-art TTS models, despite being trained on a significantly smaller dataset. Audio samples and demos are available on our website.

Recent work has explored sequence-to-sequence latent variable models for expressive speech synthesis (supporting control and transfer of prosody and style), but has not presented a coherent framework for understanding the trade-offs between the competing methods. In this paper, we propose embedding capacity (the amount of information the embedding contains about the data) as a unified method of analyzing the behavior of latent variable models of speech, comparing existing heuristic (non-variational) methods to variational methods that are able to explicitly constrain capacity using an upper bound on representational mutual information. In our proposed model (Capacitron), we show that by adding conditional dependencies to the variational posterior such that it matches the form of the true posterior, the same model can be used for high-precision prosody transfer, text-agnostic style transfer, and generation of natural-sounding prior samples. For multi-speaker models, Capacitron is able to preserve target speaker identity during inter-speaker prosody transfer and when drawing samples from the latent prior. Lastly, we introduce a method for decomposing embedding capacity hierarchically across two sets of latents, allowing a portion of the latent variability to be specified and the remaining variability sampled from a learned prior. Audio examples are available on the web.

In this paper, we present a novel system that separates the voice of a target speaker from multi-speaker signals, by making use of a reference signal from the target speaker. We achieve this by training two separate neural networks: (1) A speaker recognition network that produces speaker-discriminative embeddings; (2) A spectrogram masking network that takes both noisy spectrogram and speaker embedding as input, and produces a mask. Our system significantly reduces the speech recognition WER on multi-speaker signals, with minimal WER degradation on single-speaker signals.

Generative modeling has recently achieved remarkable success across image, video, and audio domains, demonstrating powerful capabilities for unified representation learning. Yet speech front-end tasks such as speech enhancement (SE), target speaker extraction (TSE), acoustic echo cancellation (AEC), and language-queried source separation (LASS) remain largely tackled by disparate, task-specific solutions. This fragmentation leads to redundant engineering effort, inconsistent performance, and limited extensibility. To address this gap, we introduce UniFlow, a unified framework that employs continuous generative modeling to tackle diverse speech front-end tasks in a shared latent space. Specifically, UniFlow utilizes a waveform variational autoencoder (VAE) to learn a compact latent representation of raw audio, coupled with a Diffusion Transformer (DiT) that predicts latent updates. To differentiate the speech processing task during the training, learnable condition embeddings indexed by a task ID are employed to enable maximal parameter sharing while preserving task-specific adaptability. To balance model performance and computational efficiency, we investigate and compare three generative objectives: denoising diffusion, flow matching, and mean flow within the latent domain. We validate UniFlow on multiple public benchmarks, demonstrating consistent gains over state-of-the-art baselines. UniFlow's unified latent formulation and conditional design make it readily extensible to new tasks, providing an integrated foundation for building and scaling generative speech processing pipelines. To foster future research, we will open-source our codebase.

One-shot voice conversion aims to change the timbre of any source speech to match that of the unseen target speaker with only one speech sample. Existing methods face difficulties in satisfactory speech representation disentanglement and suffer from sizable networks as some of them leverage numerous complex modules for disentanglement. In this paper, we propose a model named MAIN-VC to effectively disentangle via a concise neural network. The proposed model utilizes Siamese encoders to learn clean representations, further enhanced by the designed mutual information estimator. The Siamese structure and the newly designed convolution module contribute to the lightweight of our model while ensuring performance in diverse voice conversion tasks. The experimental results show that the proposed model achieves comparable subjective scores and exhibits improvements in objective metrics compared to existing methods in a one-shot voice conversion scenario.

We propose Guided-TTS 2, a diffusion-based generative model for high-quality adaptive TTS using untranscribed data. Guided-TTS 2 combines a speaker-conditional diffusion model with a speaker-dependent phoneme classifier for adaptive text-to-speech. We train the speaker-conditional diffusion model on large-scale untranscribed datasets for a classifier-free guidance method and further fine-tune the diffusion model on the reference speech of the target speaker for adaptation, which only takes 40 seconds. We demonstrate that Guided-TTS 2 shows comparable performance to high-quality single-speaker TTS baselines in terms of speech quality and speaker similarity with only a ten-second untranscribed data. We further show that Guided-TTS 2 outperforms adaptive TTS baselines on multi-speaker datasets even with a zero-shot adaptation setting. Guided-TTS 2 can adapt to a wide range of voices only using untranscribed speech, which enables adaptive TTS with the voice of non-human characters such as Gollum in "The Lord of the Rings".

Human listeners readily adjust to unfamiliar speakers and language varieties through exposure, but do these adaptation benefits extend to state-of-the-art spoken language models? We introduce a scalable framework that allows for in-context learning (ICL) in Phi-4 Multimodal using interleaved task prompts and audio-text pairs, and find that as few as 12 example utterances (~50 seconds) at inference time reduce word error rates by a relative 19.7% (1.2 pp.) on average across diverse English corpora. These improvements are most pronounced in low-resource varieties, when the context and target speaker match, and when more examples are provided--though scaling our procedure yields diminishing marginal returns to context length. Overall, we find that our novel ICL adaptation scheme (1) reveals a similar performance profile to human listeners, and (2) demonstrates consistent improvements to automatic speech recognition (ASR) robustness across diverse speakers and language backgrounds. While adaptation succeeds broadly, significant gaps remain for certain varieties, revealing where current models still fall short of human flexibility. We release our prompts and code on GitHub.

Recent advancements in generative speech models based on audio-text prompts have enabled remarkable innovations like high-quality zero-shot text-to-speech. However, existing models still face limitations in handling diverse audio-text speech generation tasks involving transforming input speech and processing audio captured in adverse acoustic conditions. This paper introduces SpeechX, a versatile speech generation model capable of zero-shot TTS and various speech transformation tasks, dealing with both clean and noisy signals. SpeechX combines neural codec language modeling with multi-task learning using task-dependent prompting, enabling unified and extensible modeling and providing a consistent way for leveraging textual input in speech enhancement and transformation tasks. Experimental results show SpeechX's efficacy in various tasks, including zero-shot TTS, noise suppression, target speaker extraction, speech removal, and speech editing with or without background noise, achieving comparable or superior performance to specialized models across tasks. See https://aka.ms/speechx for demo samples.

One-shot voice conversion (VC), which performs conversion across arbitrary speakers with only a single target-speaker utterance for reference, can be effectively achieved by speech representation disentanglement. Existing work generally ignores the correlation between different speech representations during training, which causes leakage of content information into the speaker representation and thus degrades VC performance. To alleviate this issue, we employ vector quantization (VQ) for content encoding and introduce mutual information (MI) as the correlation metric during training, to achieve proper disentanglement of content, speaker and pitch representations, by reducing their inter-dependencies in an unsupervised manner. Experimental results reflect the superiority of the proposed method in learning effective disentangled speech representations for retaining source linguistic content and intonation variations, while capturing target speaker characteristics. In doing so, the proposed approach achieves higher speech naturalness and speaker similarity than current state-of-the-art one-shot VC systems. Our code, pre-trained models and demo are available at https://github.com/Wendison/VQMIVC.

We propose Guided-TTS, a high-quality text-to-speech (TTS) model that does not require any transcript of target speaker using classifier guidance. Guided-TTS combines an unconditional diffusion probabilistic model with a separately trained phoneme classifier for classifier guidance. Our unconditional diffusion model learns to generate speech without any context from untranscribed speech data. For TTS synthesis, we guide the generative process of the diffusion model with a phoneme classifier trained on a large-scale speech recognition dataset. We present a norm-based scaling method that reduces the pronunciation errors of classifier guidance in Guided-TTS. We show that Guided-TTS achieves a performance comparable to that of the state-of-the-art TTS model, Grad-TTS, without any transcript for LJSpeech. We further demonstrate that Guided-TTS performs well on diverse datasets including a long-form untranscribed dataset.

We introduce Metis, a foundation model for unified speech generation. Unlike previous task-specific or multi-task models, Metis follows a pre-training and fine-tuning paradigm. It is pre-trained on large-scale unlabeled speech data using masked generative modeling and then fine-tuned to adapt to diverse speech generation tasks. Specifically, 1) Metis utilizes two discrete speech representations: SSL tokens derived from speech self-supervised learning (SSL) features, and acoustic tokens directly quantized from waveforms. 2) Metis performs masked generative pre-training on SSL tokens, utilizing 300K hours of diverse speech data, without any additional condition. 3) Through fine-tuning with task-specific conditions, Metis achieves efficient adaptation to various speech generation tasks while supporting multimodal input, even when using limited data and trainable parameters. Experiments demonstrate that Metis can serve as a foundation model for unified speech generation: Metis outperforms state-of-the-art task-specific or multi-task systems across five speech generation tasks, including zero-shot text-to-speech, voice conversion, target speaker extraction, speech enhancement, and lip-to-speech, even with fewer than 20M trainable parameters or 300 times less training data. Audio samples are are available at https://metis-demo.github.io/.

This paper introduces ClearerVoice-Studio, an open-source, AI-powered speech processing toolkit designed to bridge cutting-edge research and practical application. Unlike broad platforms like SpeechBrain and ESPnet, ClearerVoice-Studio focuses on interconnected speech tasks of speech enhancement, separation, super-resolution, and multimodal target speaker extraction. A key advantage is its state-of-the-art pretrained models, including FRCRN with 3 million uses and MossFormer with 2.5 million uses, optimized for real-world scenarios. It also offers model optimization tools, multi-format audio support, the SpeechScore evaluation toolkit, and user-friendly interfaces, catering to researchers, developers, and end-users. Its rapid adoption attracting 3000 GitHub stars and 239 forks highlights its academic and industrial impact. This paper details ClearerVoice-Studio's capabilities, architectures, training strategies, benchmarks, community impact, and future plan. Source code is available at https://github.com/modelscope/ClearerVoice-Studio.

This paper investigates a self-adaptation method for speech enhancement using auxiliary speaker-aware features; we extract a speaker representation used for adaptation directly from the test utterance. Conventional studies of deep neural network (DNN)--based speech enhancement mainly focus on building a speaker independent model. Meanwhile, in speech applications including speech recognition and synthesis, it is known that model adaptation to the target speaker improves the accuracy. Our research question is whether a DNN for speech enhancement can be adopted to unknown speakers without any auxiliary guidance signal in test-phase. To achieve this, we adopt multi-task learning of speech enhancement and speaker identification, and use the output of the final hidden layer of speaker identification branch as an auxiliary feature. In addition, we use multi-head self-attention for capturing long-term dependencies in the speech and noise. Experimental results on a public dataset show that our strategy achieves the state-of-the-art performance and also outperform conventional methods in terms of subjective quality.

Neural text-to-speech (TTS) has achieved human-like synthetic speech for single-speaker, single-language synthesis. Multilingual TTS systems are limited to resource-rich languages due to the lack of large paired text and studio-quality audio data. In most cases, TTS systems are built using a single speaker's voice. However, there is growing interest in developing systems that can synthesize voices for new speakers using only a few seconds of their speech. This paper presents ZMM-TTS, a multilingual and multispeaker framework utilizing quantized latent speech representations from a large-scale, pre-trained, self-supervised model. Our paper is the first to incorporate the representations from text-based and speech-based self-supervised learning models into multilingual speech synthesis tasks. We conducted comprehensive subjective and objective evaluations through a series of experiments. Our model has been proven effective in terms of speech naturalness and similarity for both seen and unseen speakers in six high-resource languages. We also tested the efficiency of our method on two hypothetical low-resource languages. The results are promising, indicating that our proposed approach can synthesize audio that is intelligible and has a high degree of similarity to the target speaker's voice, even without any training data for the new, unseen language.

Full-duplex speech interaction, as the most natural and intuitive mode of human communication, is driving artificial intelligence toward more human-like conversational systems. Traditional cascaded speech processing pipelines suffer from critical limitations, including accumulated latency, information loss, and error propagation across modules. To address these issues, recent efforts focus on the end-to-end audio large language models (LLMs) like GPT-4o, which primarily unify speech understanding and generation task. However, most of these models are inherently half-duplex, and rely on a suite of separate, task-specific front-end components, such as voice activity detection (VAD) and turn-taking detection (TD). In our development of speech assistant, we observed that optimizing the speech front-end is equally crucial as advancing the back-end unified model for achieving seamless, responsive interactions. To bridge this gap, we propose the first unified audio front-end LLM (UAF) tailored for full-duplex speech systems. Our model reformulates diverse audio front-end tasks into a single auto-regressive sequence prediction problem, including VAD, TD, speaker recognition (SR), automatic speech recognition (ASR) and question answer (QA). It takes streaming fixed-duration audio chunk (e.g., 600 ms) as input, leverages a reference audio prompt to anchor the target speaker at the beginning, and regressively generates discrete tokens encoding both semantic content and system-level state controls (e.g., interruption signals). Experiments demonstrate that our model achieves leading performance across multiple audio front-end tasks and significantly enhances response latency and interruption accuracy in real-world interaction scenarios.

Speech retrieval has become increasingly important as spoken content continues to grow across meetings, lectures, podcasts, and videos. Existing benchmarks and models have advanced semantic search over spoken content, but largely focus on what is said while overlooking who says it. In many real-world scenarios, however, users need to retrieve speech based jointly on semantic content and a target speaker, where the speaker may be specified naturally through a reference speech utterance rather than a predefined identity. To address this gap, we introduce VoiceTrace-Bench, a benchmark for hybrid speech retrieval in which each query combines text specifying what to retrieve with reference speech specifying who to retrieve. This setting requires models to integrate complementary semantic and speaker information directly from heterogeneous query inputs. Motivated by the joint audio-text modeling capabilities of audio-language models (ALMs), we develop VoiceTrace, a two-stage retrieval framework consisting of VoiceTrace-Emb, an embedding model that learns unified representations for efficient large-scale retrieval, and VoiceTrace-Reranker, a reranking model that jointly examines each query--candidate pair for fine-grained relevance estimation. Experiments show that VoiceTrace achieves state-of-the-art performance on established semantic speech retrieval benchmarks, while substantially outperforming cascade-based approaches on VoiceTrace-Bench, demonstrating its effectiveness for both conventional semantic retrieval and the new hybrid retrieval setting.

Personalization of on-device speech recognition (ASR) has seen explosive growth in recent years, largely due to the increasing popularity of personal assistant features on mobile devices and smart home speakers. In this work, we present Personal VAD 2.0, a personalized voice activity detector that detects the voice activity of a target speaker, as part of a streaming on-device ASR system. Although previous proof-of-concept studies have validated the effectiveness of Personal VAD, there are still several critical challenges to address before this model can be used in production: first, the quality must be satisfactory in both enrollment and enrollment-less scenarios; second, it should operate in a streaming fashion; and finally, the model size should be small enough to fit a limited latency and CPU/Memory budget. To meet the multi-faceted requirements, we propose a series of novel designs: 1) advanced speaker embedding modulation methods; 2) a new training paradigm to generalize to enrollment-less conditions; 3) architecture and runtime optimizations for latency and resource restrictions. Extensive experiments on a realistic speech recognition system demonstrated the state-of-the-art performance of our proposed method.

We present a speaker conditioned text-to-speech (TTS) system aimed at addressing challenges in generating speech for unseen speakers and supporting diverse Indian languages. Our method leverages a diffusion-based TTS architecture, where a speaker encoder extracts embeddings from short reference audio samples to condition the DDPM decoder for multispeaker generation. To further enhance prosody and naturalness, we employ a cross-attention based duration prediction mechanism that utilizes reference audio, enabling more accurate and speaker consistent timing. This results in speech that closely resembles the target speaker while improving duration modeling and overall expressiveness. Additionally, to improve zero-shot generation, we employed classifier free guidance, allowing the system to generate speech more near speech for unknown speakers. Using this approach, we trained language-specific speaker-conditioned models. Using the IndicSUPERB dataset for multiple Indian languages such as Bengali, Gujarati, Hindi, Marathi, Malayalam, Punjabi and Tamil.

Modern Voice Cloning (VC) can synthesize speech that closely matches a target speaker from only seconds of reference audio, enabling applications such as personalized speech interfaces and dubbing. In practical deployments, modern audio generation models inevitably encounter noisy reference audios, imperfect text prompts, multilingual and long-form generation settings, downstream post-processing, and adversarial perturbations, all of which can significantly hurt robustness. Despite rapid progress in VC driven by autoregressive codec-token language models and diffusion-based models, robustness under realistic deployment shifts remains underexplored. This paper introduces RVCBench, a comprehensive dataset and benchmark that evaluates Robustness in Voice Clone. RVCBench contributes a large-scale, task-aligned robustness dataset that instantiates realistic deployment shifts through controlled text-audio pairing, multilingual and long-form scenarios, expressive prompts, post-processing conditions, and passive or proactive audio perturbations. Covering 18 robustness evaluations, 204 unique speakers, and 14,370 utterance-level evaluation items, RVCBench enables unified evaluation of input sensitivity, generation stability, output resilience, and perturbation robustness. We evaluate 18 representative modern open-source VC models and reveal systematic vulnerabilities in content consistency, speaker similarity, long-form stability, post-processing resilience, adversarial robustness, and detector-facing separability. We open-source the toolkit and dataset to support reproducible evaluation and future research.

Since the beginning of the COVID-19 pandemic, remote conferencing and school-teaching have become important tools. The previous applications aim to save the commuting cost with real-time interactions. However, our application is going to lower the production and reproduction costs when preparing the communication materials. This paper proposes a system called Pre-Avatar, generating a presentation video with a talking face of a target speaker with 1 front-face photo and a 3-minute voice recording. Technically, the system consists of three main modules, user experience interface (UEI), talking face module and few-shot text-to-speech (TTS) module. The system firstly clones the target speaker's voice, and then generates the speech, and finally generate an avatar with appropriate lip and head movements. Under any scenario, users only need to replace slides with different notes to generate another new video. The demo has been released here and will be published as free software for use.

Recently, large language model (LLM) based ASR models have achieved significant progress, yet they generally lack support for multi-speaker scenarios, where the cocktail party problem remains a critical bottleneck for further advancing ASR. Existing TS-ASR methods, including end-to-end architectures with speaker embeddings and latest LLM-based explorations suffer from degraded single-speaker performance and the inability to reject when the target speaker is absent. In this paper, we propose Xiaomi-CocktailASR-1, an LLM-based end-to-end TS-ASR architecture. By utilizing reference speech as voiceprint prompts, it directly transcribes the target speaker's speech without requiring speech separation. Xiaomi-CocktailASR-1 maintains competitive performance in single-speaker scenarios, comparable to mainstream ASR models. It also features a negative sample rejection capability, outputting empty text when the target speaker is absent from the mixed speech. Additionally, Xiaomi-CocktailASR-1 supports a Chain-of-Thought (CoT) reasoning mode to provide explicit reasoning steps. Extensive experiments on various synthetic and real-world multispeaker benchmarks demonstrate that Xiaomi-CocktailASR-1 achieves state-of-the-art performance, effectively addressing the cocktail party problem through a unified architecture that balances multispeaker and single-speaker recognition accuracy, along with rejection capability.

Voice conversion aims to modify the source speaker's voice to resemble the target speaker while preserving the original speech content. Despite notable advancements in voice conversion these days, multi-lingual voice conversion (including both monolingual and cross-lingual scenarios) has yet to be extensively studied. It faces two main challenges: 1) the considerable variability in prosody and articulation habits across languages; and 2) the rarity of paired multi-lingual datasets from the same speaker. In this paper, we propose MulliVC, a novel voice conversion system that only converts timbre and keeps original content and source language prosody without multi-lingual paired data. Specifically, each training step of MulliVC contains three substeps: In step one the model is trained with monolingual speech data; then, steps two and three take inspiration from back translation, construct a cyclical process to disentangle the timbre and other information (content, prosody, and other language-related information) in the absence of multi-lingual data from the same speaker. Both objective and subjective results indicate that MulliVC significantly surpasses other methods in both monolingual and cross-lingual contexts, demonstrating the system's efficacy and the viability of the three-step approach with cycle consistency. Audio samples can be found on our demo page (mullivc.github.io).

Any-to-any voice conversion aims to transform source speech into a target voice with just a few examples of the target speaker as a reference. Recent methods produce convincing conversions, but at the cost of increased complexity -- making results difficult to reproduce and build on. Instead, we keep it simple. We propose k-nearest neighbors voice conversion (kNN-VC): a straightforward yet effective method for any-to-any conversion. First, we extract self-supervised representations of the source and reference speech. To convert to the target speaker, we replace each frame of the source representation with its nearest neighbor in the reference. Finally, a pretrained vocoder synthesizes audio from the converted representation. Objective and subjective evaluations show that kNN-VC improves speaker similarity with similar intelligibility scores to existing methods. Code, samples, trained models: https://bshall.github.io/knn-vc

Multi-talker automatic speech recognition (ASR) in conversational recordings remains an open problem, particularly in scenarios with large portion of overlapping speech where identifying and transcribing a target speaker is difficult from audio alone. Visual cues can help resolve speaker ambiguity, yet their integration into long-context audio-visual (AV) ASR systems has been limited. The CHiME-9 MCoRec task addresses this challenge by requiring transcription of audio-visual recordings of heavily-overlapped parallel conversations, followed by clustering the participants into conversational groups. In this work, we present the BUT system based on a long-context target-speaker AV-ASR model capable of processing long-form recordings in a single decoding pass. Our architecture conditions a pre-trained NVIDIA Parakeet-v2 ASR model on visual representations from a pre-trained AV-HuBERT model. To cluster participants into conversation groups, we employ Qwen3.5-122B LLM to estimate transcript topic similarity followed by hierarchical agglomerative clustering. On the MCoRec development set, the proposed system achieves 33.7% WER and a clustering F1 score of 0.97, improving over the official baseline by 16.2% WER and 0.15 F1 absolute. On the eval set, our team ranked second, being 0.16% WER and 0.5% F1 worse than the best system.

FarmerChat is Digital Green's AI-powered agricultural advisory assistant for smallholder farmers, who access it in their own language through text, voice, or photographs. Voice is a critical channel for this population, yet field-recorded speech is challenging for general-purpose automatic speech recognition (ASR) because recordings frequently contain machinery noise, background media, competing speakers, and domain-specific agricultural vocabulary. These conditions disproportionately affect crop, pest, chemical, and quantity terms that carry the meaning of a farmer's query. We present a modular, model-agnostic pipeline for improving ASR quality in FarmerChat without fine-tuning or replacing the underlying ASR model. The pipeline combines gated audio enhancement, speaker diarization and target-speaker selection, ASR, domain-aware correction using a weighted agricultural lexicon, and a quality gate for detecting unreliable transcripts. Only the diarization stage is fine-tuned; all other stages use off-the-shelf models behind common interfaces. We evaluate the pipeline on human-annotated FarmerChat recordings in Hindi, Telugu, and Odia using word error rate (WER) and a domain-weighted error rate that gives greater importance to agricultural terminology. The largest improvements occur on multi-speaker recordings, where target-speaker selection prevents competing speech from entering the transcript. Across the full corpus, the pipeline reduces WER by 16-23% relative on three cloud ASR models and by 5% on an on-device model. On multi-speaker recordings, the reductions are 32-42% for the cloud models and 16% for the on-device model. All reported reductions are statistically significant. These results show that targeted preprocessing, speaker selection, and domain-aware post-processing can substantially improve agricultural speech transcription while preserving the underlying ASR model.

One-shot voice conversion(VC) aims to change the timbre of any source speech to match that of the target speaker with only one speech sample. Existing style transfer-based VC methods relied on speech representation disentanglement and suffered from accurately and independently encoding each speech component and recomposing back to converted speech effectively. To tackle this, we proposed Pureformer-VC, which utilizes Conformer blocks to build a disentangled encoder, and Zipformer blocks to build a style transfer decoder as the generator. In the decoder, we used effective styleformer blocks to integrate speaker characteristics effectively into the generated speech. The models used the generative VAE loss for encoding components and triplet loss for unsupervised discriminative training. We applied the styleformer method to Zipformer's shared weights for style transfer. The experimental results show that the proposed model achieves comparable subjective scores and exhibits improvements in objective metrics compared to existing methods in a one-shot voice conversion scenario.

Conventional voice conversion modifies voice characteristics from a source speaker to a target speaker, relying on audio input from both sides. However, this process becomes infeasible when clean audio is unavailable, such as in silent videos or noisy environments. In this work, we focus on the task of Silent Face-based Voice Conversion (SFVC), which does voice conversion entirely from visual inputs. i.e., given images of a target speaker and a silent video of a source speaker containing lip motion, SFVC generates speech aligning the identity of the target speaker while preserving the speech content in the source silent video. As this task requires generating intelligible speech and converting identity using only visual cues, it is particularly challenging. To address this, we introduce MuteSwap, a novel framework that employs contrastive learning to align cross-modality identities and minimize mutual information to separate shared visual features. Experimental results show that MuteSwap achieves impressive performance in both speech synthesis and identity conversion, especially under noisy conditions where methods dependent on audio input fail to produce intelligible results, demonstrating both the effectiveness of our training approach and the feasibility of SFVC.

The task of few-shot style transfer for voice cloning in text-to-speech (TTS) synthesis aims at transferring speaking styles of an arbitrary source speaker to a target speaker's voice using very limited amount of neutral data. This is a very challenging task since the learning algorithm needs to deal with few-shot voice cloning and speaker-prosody disentanglement at the same time. Accelerating the adaptation process for a new target speaker is of importance in real-world applications, but even more challenging. In this paper, we approach to the hard fast few-shot style transfer for voice cloning task using meta learning. We investigate the model-agnostic meta-learning (MAML) algorithm and meta-transfer a pre-trained multi-speaker and multi-prosody base TTS model to be highly sensitive for adaptation with few samples. Domain adversarial training mechanism and orthogonal constraint are adopted to disentangle speaker and prosody representations for effective cross-speaker style transfer. Experimental results show that the proposed approach is able to conduct fast voice cloning using only 5 samples (around 12 second speech data) from a target speaker, with only 100 adaptation steps. Audio samples are available online.

Zero-shot voice conversion (VC) aims to convert a source utterance into the voice of an unseen target speaker while preserving its linguistic content. Although recent systems have improved conversion quality, building zero-shot VC systems for interactive scenarios remains challenging because high-fidelity speaker transfer and low-latency streaming inference are difficult to achieve simultaneously. In this work, we present X-VC, a zero-shot streaming VC system that performs one-step conversion in the latent space of a pretrained neural codec. X-VC uses a dual-conditioning acoustic converter that jointly models source codec latents and frame-level acoustic conditions derived from target reference speech, while injecting utterance-level target speaker information through adaptive normalization. To reduce the mismatch between training and inference, we train the model with generated paired data and a role-assignment strategy that combines standard, reconstruction, and reversed modes. For streaming inference, we further adopt a chunkwise inference scheme with overlap smoothing that is aligned with the segment-based training paradigm of the codec. Experiments on Seed-TTS-Eval show that X-VC achieves the best streaming WER in both English and Chinese, strong speaker similarity in same-language and cross-lingual settings, and substantially lower offline real-time factor than the compared baselines. These results suggest that codec-space one-step conversion is a practical approach for building high-quality low-latency zero-shot VC systems. Audio samples are available at https://x-vc.github.io. Our code and checkpoints will also be released.

We introduce AnyEnhance, a unified generative model for voice enhancement that processes both speech and singing voices. Based on a masked generative model, AnyEnhance is capable of handling both speech and singing voices, supporting a wide range of enhancement tasks including denoising, dereverberation, declipping, super-resolution, and target speaker extraction, all simultaneously and without fine-tuning. AnyEnhance introduces a prompt-guidance mechanism for in-context learning, which allows the model to natively accept a reference speaker's timbre. In this way, it could boost enhancement performance when a reference audio is available and enable the target speaker extraction task without altering the underlying architecture. Moreover, we also introduce a self-critic mechanism into the generative process for masked generative models, yielding higher-quality outputs through iterative self-assessment and refinement. Extensive experiments on various enhancement tasks demonstrate AnyEnhance outperforms existing methods in terms of both objective metrics and subjective listening tests. Demo audios are publicly available at https://amphionspace.github.io/anyenhance/.

Many existing audio processing and generation models rely on task-specific architectures, resulting in fragmented development efforts and limited extensibility. It is therefore promising to design a unified framework capable of handling multiple tasks, while providing robust instruction and audio understanding and high-quality audio generation. This requires a compatible paradigm design, a powerful backbone, and a high-fidelity audio reconstruction module. To meet these requirements, this technical report introduces QuarkAudio, a decoder-only autoregressive (AR) LM-based generative framework that unifies multiple tasks. The framework includes a unified discrete audio tokenizer, H-Codec, which incorporates self-supervised learning (SSL) representations into the tokenization and reconstruction process. We further propose several improvements to H-Codec, such as a dynamic frame-rate mechanism and extending the audio sampling rate to 48 kHz. QuarkAudio unifies tasks by using task-specific conditional information as the conditioning sequence of the decoder-only LM, and predicting discrete target audio tokens in an AR manner. The framework supports a wide range of audio processing and generation tasks, including speech restoration (SR), target speaker extraction (TSE), speech separation (SS), voice conversion (VC), and language-queried audio source separation (LASS). In addition, we extend downstream tasks to universal free-form audio editing guided by natural language instructions (including speech semantic editing and audio event editing). Experimental results show that H-Codec achieves high-quality audio reconstruction with a low frame rate, improving both the efficiency and performance of downstream audio generation, and that QuarkAudio delivers competitive or comparable performance to state-of-the-art task-specific or multi-task systems across multiple tasks.

Generative modeling has recently achieved remarkable success across text, image, and audio domains, demonstrating powerful capabilities for unified representation learning. However, audio generation models still face challenges in terms of audio quality and generalization ability across tasks. This fragmentation results in redundant development efforts, inconsistent performance, and limited extensibility. To address these issues, we propose UniTok-Audio, a scalable and extensible framework for unified audio generation tasks. Specifically, 1) UniTok-Audio extracts continuous feature of conditions to generates discrete tokens of target audio in an autoregressive manner; 2) a special task identifier token unifies different learning patterns of multiple tasks in a single framework; 3) a dual-stream audio codec involving acoustic and semantic branch is developed for high-fidelity waveform reconstruction. Experimental results demonstrate that UniTok-Audio achieves competitive performance in comparation with state-of-the-art task-specific or multi-task systems across five time-aligned tasks: speech restoration, target speaker extraction, speech separation, voice conversion, and language-queried audio source separation. To foster future research, we will open-source our codebase. The demo page of our work can be found here: https://alibaba.github.io/unified-audio.

We introduce Vox-Profile, a comprehensive benchmark to characterize rich speaker and speech traits using speech foundation models. Unlike existing works that focus on a single dimension of speaker traits, Vox-Profile provides holistic and multi-dimensional profiles that reflect both static speaker traits (e.g., age, sex, accent) and dynamic speech properties (e.g., emotion, speech flow). This benchmark is grounded in speech science and linguistics, developed with domain experts to accurately index speaker and speech characteristics. We report benchmark experiments using over 15 publicly available speech datasets and several widely used speech foundation models that target various static and dynamic speaker and speech properties. In addition to benchmark experiments, we showcase several downstream applications supported by Vox-Profile. First, we show that Vox-Profile can augment existing speech recognition datasets to analyze ASR performance variability. Vox-Profile is also used as a tool to evaluate the performance of speech generation systems. Finally, we assess the quality of our automated profiles through comparison with human evaluation and show convergent validity. Vox-Profile is publicly available at: https://github.com/tiantiaf0627/vox-profile-release.

Simultaneous speech-to-text translation (SimulST) translates source-language speech into target-language text concurrently with the speaker's speech, ensuring low latency for better user comprehension. Despite its intended application to unbounded speech, most research has focused on human pre-segmented speech, simplifying the task and overlooking significant challenges. This narrow focus, coupled with widespread terminological inconsistencies, is limiting the applicability of research outcomes to real-world applications, ultimately hindering progress in the field. Our extensive literature review of 110 papers not only reveals these critical issues in current research but also serves as the foundation for our key contributions. We 1) define the steps and core components of a SimulST system, proposing a standardized terminology and taxonomy; 2) conduct a thorough analysis of community trends, and 3) offer concrete recommendations and future directions to bridge the gaps in existing literature, from evaluation frameworks to system architectures, for advancing the field towards more realistic and effective SimulST solutions.

This paper presents our systems (denoted as T13) for the singing voice conversion challenge (SVCC) 2023. For both in-domain and cross-domain English singing voice conversion (SVC) tasks (Task 1 and Task 2), we adopt a recognition-synthesis approach with self-supervised learning-based representation. To achieve data-efficient SVC with a limited amount of target singer/speaker's data (150 to 160 utterances for SVCC 2023), we first train a diffusion-based any-to-any voice conversion model using publicly available large-scale 750 hours of speech and singing data. Then, we finetune the model for each target singer/speaker of Task 1 and Task 2. Large-scale listening tests conducted by SVCC 2023 show that our T13 system achieves competitive naturalness and speaker similarity for the harder cross-domain SVC (Task 2), which implies the generalization ability of our proposed method. Our objective evaluation results show that using large datasets is particularly beneficial for cross-domain SVC.

Speech language models (SpeechLMs) have achieved substantial progress by extending large language models (LLMs) to the speech modality. However, SpeechLM evaluation remains heavily centered on English, limiting reliable assessment of multilingual speech capabilities. Straightforward benchmark transfer through ASR, translation, normalization, and TTS can corrupt language-specific instructions, answer constraints, and spoken forms; for audio understanding, transferring source-language audio also fails to preserve target-language speaker attributes, accents, and paralinguistic properties. To address these limitations, we propose two human-agent benchmark-construction frameworks: one transfers source-language SpokenQA benchmarks into target-language SpokenQA benchmarks, and the other converts target-language ASR corpora into audio understanding benchmarks using transcriptions and speaker metadata. Using these frameworks, we construct and publicly release three Korean speech benchmarks: KVoiceBench and KOpenAudioBench for Korean SpokenQA, and KMMAU for Korean audio understanding, comprising 12,345 samples in total. We evaluate eight recent SpeechLMs and find that English-Korean performance gaps vary substantially across models and task families, and that SpokenQA and audio understanding rankings diverge, revealing complementary weaknesses invisible to English-only evaluation.

We introduce the novel concept of anti-transfer learning for speech processing with convolutional neural networks. While transfer learning assumes that the learning process for a target task will benefit from re-using representations learned for another task, anti-transfer avoids the learning of representations that have been learned for an orthogonal task, i.e., one that is not relevant and potentially misleading for the target task, such as speaker identity for speech recognition or speech content for emotion recognition. In anti-transfer learning, we penalize similarity between activations of a network being trained and another one previously trained on an orthogonal task, which yields more suitable representations. This leads to better generalization and provides a degree of control over correlations that are spurious or undesirable, e.g. to avoid social bias. We have implemented anti-transfer for convolutional neural networks in different configurations with several similarity metrics and aggregation functions, which we evaluate and analyze with several speech and audio tasks and settings, using six datasets. We show that anti-transfer actually leads to the intended invariance to the orthogonal task and to more appropriate features for the target task at hand. Anti-transfer learning consistently improves classification accuracy in all test cases. While anti-transfer creates computation and memory cost at training time, there is relatively little computation cost when using pre-trained models for orthogonal tasks. Anti-transfer is widely applicable and particularly useful where a specific invariance is desirable or where trained models are available and labeled data for orthogonal tasks are difficult to obtain.

In this paper, we introduce a zero-shot Voice Transfer (VT) module that can be seamlessly integrated into a multi-lingual Text-to-speech (TTS) system to transfer an individual's voice across languages. Our proposed VT module comprises a speaker-encoder that processes reference speech, a bottleneck layer, and residual adapters, connected to preexisting TTS layers. We compare the performance of various configurations of these components and report Mean Opinion Score (MOS) and Speaker Similarity across languages. Using a single English reference speech per speaker, we achieve an average voice transfer similarity score of 73% across nine target languages. Vocal characteristics contribute significantly to the construction and perception of individual identity. The loss of one's voice, due to physical or neurological conditions, can lead to a profound sense of loss, impacting one's core identity. As a case study, we demonstrate that our approach can not only transfer typical speech but also restore the voices of individuals with dysarthria, even when only atypical speech samples are available - a valuable utility for those who have never had typical speech or banked their voice. Cross-lingual typical audio samples, plus videos demonstrating voice restoration for dysarthric speakers are available here (google.github.io/tacotron/publications/zero_shot_voice_transfer).

Speaker-adaptive Text-to-Speech (TTS) synthesis has attracted considerable attention due to its broad range of applications, such as personalized voice assistant services. While several approaches have been proposed, they often exhibit high sensitivity to either the quantity or the quality of target speech samples. To address these limitations, we introduce Stable-TTS, a novel speaker-adaptive TTS framework that leverages a small subset of a high-quality pre-training dataset, referred to as prior samples. Specifically, Stable-TTS achieves prosody consistency by leveraging the high-quality prosody of prior samples, while effectively capturing the timbre of the target speaker. Additionally, it employs a prior-preservation loss during fine-tuning to maintain the synthesis ability for prior samples to prevent overfitting on target samples. Extensive experiments demonstrate the effectiveness of Stable-TTS even under limited amounts of and noisy target speech samples.

Target Speech Extraction (TSE) in real-world conversational scenarios suffers from severe performance degradation due to the domain gap between synthetic training data and complex acoustic environments, where signal-level ground truth is typically unavailable. To address this challenge, we make the first attempt to extend RemixIT from speech enhancement to TSE and propose a progressive synthetic-to-real adaptation framework for real-world TSE with two fine-tuning stages. The first stage leverages region-wise speaker similarity and silence constraints within a target-aware adaptation framework to jointly optimize the model using synthetic and weakly supervised real-world data, injecting real-world traits while preserving synthetic-learned capabilities. The second stage further adapts the model using only real-world data through our RemixIT-TSE, where quality-filtered teacher pseudo targets, which guarantee reliable student training, provide signal-level supervision via SI-SNR loss. Experiments on the real conversational evaluation set (EVAL-2) of the SLT 2026 REAL-TSE Challenge, the proposed method achieves a 6.53% relative TER reduction, together with relative improvements of 21.84% in speaker similarity, 9.89% in DNSMOS-P808, and 4.10% in target-activity F1 over the source-domain baseline, demonstrating its effectiveness under unseen real-world conditions. Source code at https: //github.com/YuWang-Speech/RemixIT-TSE.

We propose UtterTune, a lightweight adaptation method that fine-tunes a multilingual text-to-speech (TTS) system based on a large language model (LLM) architecture, designed to enhance the controllability of pronunciation in a target language while preserving performance in others. While LLM architectures have enabled TTS models to achieve remarkable naturalness, accurately modeling grapheme-to-phoneme (G2P) mapping and prosody remains challenging, especially when the model omits an explicit G2P module and directly processes minimally encoded text (e.g., byte-pair encoding). UtterTune leverages low-rank adaptation to enable the control of segmental pronunciation and pitch accent at the phoneme level for Japanese speech, the target language in this paper, while maintaining naturalness and speaker similarity in a zero-shot setting. Objective and subjective evaluations confirm its effectiveness.

Modern zero-shot text-to-speech (TTS) models offer unprecedented expressivity but also pose serious crime risks, as they can synthesize voices of individuals who never consented. In this context, speaker unlearning aims to prevent the generation of specific speaker identities upon request. Existing approaches, reliant on retraining, are costly and limited to speakers seen in the training set. We present TruS, a training-free speaker unlearning framework that shifts the paradigm from data deletion to inference-time control. TruS steers identity-specific hidden activations to suppress target speakers while preserving other attributes (e.g., prosody and emotion). Experimental results show that TruS effectively prevents voice generation on both seen and unseen opt-out speakers, establishing a scalable safeguard for speech synthesis. The demo and code are available on http://mmai.ewha.ac.kr/trus.

We propose PersonaGesture, a diffusion-based pipeline for single-reference co-speech gesture personalization of unseen speakers. Given target speech and one motion clip from a new speaker, the model must synthesize gestures that follow the new utterance while retaining speaker-specific pose choices, without per-speaker optimization. This setting is useful for avatars and virtual agents, but it is hard because the reference mixes stable speaker habits with utterance-specific trajectories. PersonaGesture consists of two key components, Adaptive Style Infusion (ASI) and Implicit Distribution Rectification (IDR), to separate temporal identity evidence from residual statistic correction. A Style Perceiver first encodes the variable-length reference into compact speaker-memory tokens. ASI injects these tokens into denoising through zero-initialized residual cross-attention, enabling style evidence to affect motion formation without replacing the pretrained speech-to-motion prior. Building on this, IDR applies a length-aware diagonal affine map in latent space to correct residual channel-wise moments estimated from the same reference. Across BEAT2 and ZeroEGGS, we evaluate quantitative metrics, reference-identity controls, same-audio diagnostics, qualitative comparisons, and human preference. Experiments show that separating denoising-time speaker memory from conservative post-generation moment correction improves unseen-speaker personalization over collapsed style codes, full-reference attention, and one-clip finetuning. Project: https://xiangyue-zhang.github.io/PersonaGesture.

Most automatic speaker verification (ASV) systems operate on individual utterances, despite real-world interactions typically consisting of multiple utterances. As speech accumulates, increasingly rich speaker information becomes available through acoustic, prosodic, and linguistic cues, potentially challenging speaker anonymization methods that primarily target vocal characteristics. We investigate ASV in a multi-utterance, multimodal setting and examine whether aggregating information across anonymized speech impacts privacy. We first study audio-only aggregation across multiple anonymized utterances and observe consistent performance improvements as more speech becomes available. We then incorporate prosodic and linguistic information, showing that multimodal systems outperform unimodal approaches. Finally, we compare aggregation strategies and find that frame-level aggregation yields the lowest EERs. Even with only five anonymized utterances, combining audio and text reduces EER by over 15% relative to audio-only aggregation, demonstrating that substantial speaker-discriminative information remains accessible despite anonymization.

Speaker adaptation in text-to-speech synthesis (TTS) is to finetune a pre-trained TTS model to adapt to new target speakers with limited data. While much effort has been conducted towards this task, seldom work has been performed for low computational resource scenarios due to the challenges raised by the requirement of the lightweight model and less computational complexity. In this paper, a tiny VITS-based TTS model, named AdaVITS, for low computing resource speaker adaptation is proposed. To effectively reduce parameters and computational complexity of VITS, an iSTFT-based wave construction decoder is proposed to replace the upsampling-based decoder which is resource-consuming in the original VITS. Besides, NanoFlow is introduced to share the density estimate across flow blocks to reduce the parameters of the prior encoder. Furthermore, to reduce the computational complexity of the textual encoder, scaled-dot attention is replaced with linear attention. To deal with the instability caused by the simplified model, instead of using the original text encoder, phonetic posteriorgram (PPG) is utilized as linguistic feature via a text-to-PPG module, which is then used as input for the encoder. Experiment shows that AdaVITS can generate stable and natural speech in speaker adaptation with 8.97M model parameters and 0.72GFlops computational complexity.

We present TANGO, a framework for generating co-speech body-gesture videos. Given a few-minute, single-speaker reference video and target speech audio, TANGO produces high-fidelity videos with synchronized body gestures. TANGO builds on Gesture Video Reenactment (GVR), which splits and retrieves video clips using a directed graph structure - representing video frames as nodes and valid transitions as edges. We address two key limitations of GVR: audio-motion misalignment and visual artifacts in GAN-generated transition frames. In particular, (i) we propose retrieving gestures using latent feature distance to improve cross-modal alignment. To ensure the latent features could effectively model the relationship between speech audio and gesture motion, we implement a hierarchical joint embedding space (AuMoCLIP); (ii) we introduce the diffusion-based model to generate high-quality transition frames. Our diffusion model, Appearance Consistent Interpolation (ACInterp), is built upon AnimateAnyone and includes a reference motion module and homography background flow to preserve appearance consistency between generated and reference videos. By integrating these components into the graph-based retrieval framework, TANGO reliably produces realistic, audio-synchronized videos and outperforms all existing generative and retrieval methods. Our codes and pretrained models are available: https://pantomatrix.github.io/TANGO/

Accent plays a significant role in speech communication, influencing one's capability to understand as well as conveying a person's identity. This paper introduces a novel and efficient framework for accented Text-to-Speech (TTS) synthesis based on a Conditional Variational Autoencoder. It has the ability to synthesize a selected speaker's voice, and convert this to any desired target accent. Our thorough experiments validate the effectiveness of the proposed framework using both objective and subjective evaluations. The results also show remarkable performance in terms of the model's ability to manipulate accents in the synthesized speech. Overall, our proposed framework presents a promising avenue for future accented TTS research.

In cross-lingual zero-shot text-to-speech, the accent of the reference leaks into the target speech. We propose accent analogy guidance (AAG), a training-free sampler term that subtracts an accent direction estimated from the model's own predictions for one synthetic voice rendered in both languages, so the voice cancels and only the accent remains. By a blind LLM accent judge on real dubbing data, reweighting classifier-free guidance between reference and text, and its variants, stay near one identity-accent trade-off curve; we score a method by its speaker similarity above that curve at equal accent (ΔSIM). Across four open TTS models AAG lies above the curve: on OmniVoice ΔSIM is +0.11 to +0.27 on three test sets (accent 3.51 to 4.28 on a 1-5 scale at speaker similarity 0.29, where reweighting keeps 0.02); MaskGCT and CosyVoice 2 also lie above their curves, and on F5-TTS it is more native than any reweighting setting. An LLM-free language-ID measure and a twelve-listener panel agree. A premise test and the reach of a model's own curve indicate in advance whether and roughly how much AAG can gain, predicting the one model where it gains nothing (X-Voice).

Recent advancements in text-to-speech (TTS) models have been driven by the integration of large language models (LLMs), enhancing semantic comprehension and improving speech naturalness. However, existing LLM-based TTS models often lack open-source training code and efficient inference acceleration frameworks, limiting their accessibility and adaptability. Additionally, there is no publicly available TTS model specifically optimized for podcast scenarios, which are in high demand for voice interaction applications. To address these limitations, we introduce Muyan-TTS, an open-source trainable TTS model designed for podcast applications within a $50,000 budget. Our model is pre-trained on over 100,000 hours of podcast audio data, enabling zero-shot TTS synthesis with high-quality voice generation. Furthermore, Muyan-TTS supports speaker adaptation with dozens of minutes of target speech, making it highly customizable for individual voices. In addition to open-sourcing the model, we provide a comprehensive data collection and processing pipeline, a full training procedure, and an optimized inference framework that accelerates LLM-based TTS synthesis. Our code and models are available at https://github.com/MYZY-AI/Muyan-TTS.

Despite advancements in automatic speech recognition systems (ASR), current systems exhibit speaker-attribute bias, i.e., their speech recognition performance is biased against certain speakers based on their demographic attributes such as gender, accents, and speaker type. However, accurately assessing speaker attribute bias in a given ASR system requires the availability of a bias evaluation dataset with comparable speech across subgroups of a speaker attribute. In this paper, we introduce African speech Bias Evaluation Dataset (AfriBED), a novel speech recognition bias evaluation dataset for two low resource African languages, Bemba and Nyanja, to detect and estimate gender and speaker-type bias for ASR systems. The dataset comprises 9 hours of speech with 3928 utterances recorded by 80 speakers for Bemba, while the Nyanja set includes 6260 utterances with approximately 18 hours of speech recorded by 127 speakers. The results of our baseline experiments demonstrate that the datasets are useful for examining gender and speaker-type attribute bias in the target languages.

While modern Text-to-Speech (TTS) systems achieve high fidelity for read-style speech, they struggle to generate Autonomous Sensory Meridian Response (ASMR), a specialized, low-intensity speech style essential for relaxation. The inherent challenges include ASMR's subtle, often unvoiced characteristics and the demand for zero-shot speaker adaptation. In this paper, we introduce DeepASMR, the first framework designed for zero-shot ASMR generation. We demonstrate that a single short snippet of a speaker's ordinary, read-style speech is sufficient to synthesize high-fidelity ASMR in their voice, eliminating the need for whispered training data from the target speaker. Methodologically, we first identify that discrete speech tokens provide a soft factorization of ASMR style from speaker timbre. Leveraging this insight, we propose a two-stage pipeline incorporating a Large Language Model (LLM) for content-style encoding and a flow-matching acoustic decoder for timbre reconstruction. Furthermore, we contribute DeepASMR-DB, a comprehensive 670-hour English-Chinese multi-speaker ASMR speech corpus, and introduce a novel evaluation protocol integrating objective metrics, human listening tests, LLM-based scoring and unvoiced speech analysis. Extensive experiments confirm that DeepASMR achieves state-of-the-art naturalness and style fidelity in ASMR generation for anyone of any voice, while maintaining competitive performance on normal speech synthesis.

Automatic Speech Recognition (ASR) in professional settings faces challenges that existing benchmarks underplay: dense domain terminology, formal register variation, and near-zero tolerance for critical entity errors. We present ProfASR-Bench, a professional-talk evaluation suite for high-stakes applications across finance, medicine, legal, and technology. Each example pairs a natural-language prompt (domain cue and/or speaker profile) with an entity-rich target utterance, enabling controlled measurement of context-conditioned recognition. The corpus supports conventional ASR metrics alongside entity-aware scores and slice-wise reporting by accent and gender. Using representative families Whisper (encoder-decoder ASR) and Qwen-Omni (audio language models) under matched no-context, profile, domain+profile, oracle, and adversarial conditions, we find a consistent pattern: lightweight textual context produces little to no change in average word error rate (WER), even with oracle prompts, and adversarial prompts do not reliably degrade performance. We term this the context-utilization gap (CUG): current systems are nominally promptable yet underuse readily available side information. ProfASR-Bench provides a standardized context ladder, entity- and slice-aware reporting with confidence intervals, and a reproducible testbed for comparing fusion strategies across model families. Dataset: https://huggingface.co/datasets/prdeepakbabu/ProfASR-Bench Code: https://github.com/prdeepakbabu/ProfASR-Bench

This paper integrates graph-to-sequence into an end-to-end text-to-speech framework for syntax-aware modelling with syntactic information of input text. Specifically, the input text is parsed by a dependency parsing module to form a syntactic graph. The syntactic graph is then encoded by a graph encoder to extract the syntactic hidden information, which is concatenated with phoneme embedding and input to the alignment and flow-based decoding modules to generate the raw audio waveform. The model is experimented on two languages, English and Mandarin, using single-speaker, few samples of target speakers, and multi-speaker datasets, respectively. Experimental results show better prosodic consistency performance between input text and generated audio, and also get higher scores in the subjective prosodic evaluation, and show the ability of voice conversion. Besides, the efficiency of the model is largely boosted through the design of the AI chip operator with 5x acceleration.

Zero-shot text-to-speech models can clone a speaker's timbre from a short reference audio, but they also strongly inherit the speaking style present in the reference. As a result, synthesizing speech with a desired style often requires carefully selecting reference audio, which is impractical when only limited or mismatched references are available. While recent controllable TTS methods attempt to address this issue, they typically rely on absolute style targets and discrete textual prompts, and therefore do not support continuous and reference-relative style control. We propose ReStyle-TTS, a framework that enables continuous and reference-relative style control in zero-shot TTS. Our key insight is that effective style control requires first reducing the model's implicit dependence on reference style before introducing explicit control mechanisms. To this end, we introduce Decoupled Classifier-Free Guidance (DCFG), which independently controls text and reference guidance, reducing reliance on reference style while preserving text fidelity. On top of this, we apply style-specific LoRAs together with Orthogonal LoRA Fusion to enable continuous and disentangled multi-attribute control, and introduce a Timbre Consistency Optimization module to mitigate timbre drift caused by weakened reference guidance. Experiments show that ReStyle-TTS enables user-friendly, continuous, and relative control over pitch, energy, and multiple emotions while maintaining intelligibility and speaker timbre, and performs robustly in challenging mismatched reference-target style scenarios.

Expressive voice conversion aims to transfer both speaker identity and expressive attributes from a target speech to a given source speech. In this work, we improve over a self-supervised, non-autoregressive framework with a conditional variational autoencoder, focusing on reducing source timbre leakage and improving linguistic-acoustic disentanglement for better style transfer. To minimize style leakage, we use multilingual discrete speech units for content representation and reinforce embeddings with augmentation-based similarity loss and mix-style layer normalization. To enhance expressivity transfer, we incorporate local F0 information via cross-attention and extract style embeddings enriched with global pitch and energy features. Experiments show our model outperforms baselines in emotion and speaker similarity, demonstrating superior style adaptation and reduced source style leakage.

Video dubbing aims to synthesize lip movements that match target speech while preserving the speaker identity, head pose, and background of a source video. Existing editors are predominantly trained via self-reconstruction under original paired audio, even though the source mouth becomes a conflicting target when driving speech is replaced. We introduce replacement-aware cross-audio supervision: paired-audio samples use full-frame reconstruction, whereas unpaired replacement-audio samples mask out source-mouth reconstruction losses and supervise the mouth solely through audio-visual synchronization while preserving unmasked facial regions and background. Because offline dubbing provides the complete source video and target speech beforehand, we present VidDub, a full-context diffusion editor distilled into two denoising steps (2 NFE). Our replacement-aware teacher first learns accurate lip synchronization without regressing toward conflicting source mouth movements. Matched trajectory regression then transfers the teacher's CFG-guided trajectories to a two-step student, and distribution matching distillation recovers visual quality after step compression. We will release the curated training dataset, VidDub-Bench, fixed paired- and cross-audio evaluation manifests, preprocessing outputs, and unified evaluation code. Across three training seeds, masking out conflicting source-mouth reconstruction improves cross-audio Sync-C by 0.833; the final two-step model combines strong lip synchronization with superior visual quality, identity preservation, and visual speech recognition across four benchmarks.

We propose a cross-lingual neural codec language model, VALL-E X, for cross-lingual speech synthesis. Specifically, we extend VALL-E and train a multi-lingual conditional codec language model to predict the acoustic token sequences of the target language speech by using both the source language speech and the target language text as prompts. VALL-E X inherits strong in-context learning capabilities and can be applied for zero-shot cross-lingual text-to-speech synthesis and zero-shot speech-to-speech translation tasks. Experimental results show that it can generate high-quality speech in the target language via just one speech utterance in the source language as a prompt while preserving the unseen speaker's voice, emotion, and acoustic environment. Moreover, VALL-E X effectively alleviates the foreign accent problems, which can be controlled by a language ID. Audio samples are available at https://aka.ms/vallex.

Some text-to-speech systems ship a synthesis model and preset style vectors but withhold the reference encoder that turns a recording into a style vector, so a user cannot obtain a style for a new voice. We recover that vector without the encoder by inverting the released pipeline with gradient descent: all weights stay frozen and only the style vector is optimized, against time-pooled WavLM statistics of one recording of the target. The objective discards the time axis, so no transcript is needed. Two constraints from the release make the result a drop-in style: every row of the timbre style stays on the unit sphere where the presets lie, and the small duration style, which a time-pooled loss cannot see, is fitted to the recording's speaking rate. On SupertonicTTS, over 147 speakers and 100 held-out sentences each, ECAPA-TDNN similarity rises from 0.129 to 0.419, every recovered style starts from a preset and ends closer to its target than that preset was, and the pooled word error rate stays below that of the presets. A verifier at its equal-error point accepts 52% of the recovered voices as the target speaker, against 1% of the presets.

We work to create a multilingual speech synthesis system which can generate speech with the proper accent while retaining the characteristics of an individual voice. This is challenging to do because it is expensive to obtain bilingual training data in multiple languages, and the lack of such data results in strong correlations that entangle speaker, language, and accent, resulting in poor transfer capabilities. To overcome this, we present a multilingual, multiaccented, multispeaker speech synthesis model based on RADTTS with explicit control over accent, language, speaker and fine-grained F_0 and energy features. Our proposed model does not rely on bilingual training data. We demonstrate an ability to control synthesized accent for any speaker in an open-source dataset comprising of 7 accents. Human subjective evaluation demonstrates that our model can better retain a speaker's voice and accent quality than controlled baselines while synthesizing fluent speech in all target languages and accents in our dataset.

Spontaneous speaking style exhibits notable differences from other speaking styles due to various spontaneous phenomena (e.g., filled pauses, prolongation) and substantial prosody variation (e.g., diverse pitch and duration variation, occasional non-verbal speech like a smile), posing challenges to modeling and prediction of spontaneous style. Moreover, the limitation of high-quality spontaneous data constrains spontaneous speech generation for speakers without spontaneous data. To address these problems, we propose SponTTS, a two-stage approach based on neural bottleneck (BN) features to model and transfer spontaneous style for TTS. In the first stage, we adopt a Conditional Variational Autoencoder (CVAE) to capture spontaneous prosody from a BN feature and involve the spontaneous phenomena by the constraint of spontaneous phenomena embedding prediction loss. Besides, we introduce a flow-based predictor to predict a latent spontaneous style representation from the text, which enriches the prosody and context-specific spontaneous phenomena during inference. In the second stage, we adopt a VITS-like module to transfer the spontaneous style learned in the first stage to the target speakers. Experiments demonstrate that SponTTS is effective in modeling spontaneous style and transferring the style to the target speakers, generating spontaneous speech with high naturalness, expressiveness, and speaker similarity. The zero-shot spontaneous style TTS test further verifies the generalization and robustness of SponTTS in generating spontaneous speech for unseen speakers.

Automatic speaker verification (ASV) is one of the most natural and convenient means of biometric person recognition. Unfortunately, just like all other biometric systems, ASV is vulnerable to spoofing, also referred to as "presentation attacks." These vulnerabilities are generally unacceptable and call for spoofing countermeasures or "presentation attack detection" systems. In addition to impersonation, ASV systems are vulnerable to replay, speech synthesis, and voice conversion attacks. The ASVspoof 2019 edition is the first to consider all three spoofing attack types within a single challenge. While they originate from the same source database and same underlying protocol, they are explored in two specific use case scenarios. Spoofing attacks within a logical access (LA) scenario are generated with the latest speech synthesis and voice conversion technologies, including state-of-the-art neural acoustic and waveform model techniques. Replay spoofing attacks within a physical access (PA) scenario are generated through carefully controlled simulations that support much more revealing analysis than possible previously. Also new to the 2019 edition is the use of the tandem detection cost function metric, which reflects the impact of spoofing and countermeasures on the reliability of a fixed ASV system. This paper describes the database design, protocol, spoofing attack implementations, and baseline ASV and countermeasure results. It also describes a human assessment on spoofed data in logical access. It was demonstrated that the spoofing data in the ASVspoof 2019 database have varied degrees of perceived quality and similarity to the target speakers, including spoofed data that cannot be differentiated from bona-fide utterances even by human subjects.

Voice Conversion (VC) must be achieved while maintaining the content of the source speech and representing the characteristics of the target speaker. The existing methods do not simultaneously satisfy the above two aspects of VC, and their conversion outputs suffer from a trade-off problem between maintaining source contents and target characteristics. In this study, we propose Triple Adaptive Attention Normalization VC (TriAAN-VC), comprising an encoder-decoder and an attention-based adaptive normalization block, that can be applied to non-parallel any-to-any VC. The proposed adaptive normalization block extracts target speaker representations and achieves conversion while minimizing the loss of the source content with siamese loss. We evaluated TriAAN-VC on the VCTK dataset in terms of the maintenance of the source content and target speaker similarity. Experimental results for one-shot VC suggest that TriAAN-VC achieves state-of-the-art performance while mitigating the trade-off problem encountered in the existing VC methods.

Speech separation (SS) has witnessed substantial progress in recent years with the advent of neural network-based methods, achieving notable improvements on signal-level evaluation metrics. Existing speech separation systems are mostly optimized with signal-level objectives, and often yield outputs that are acceptable in waveform metrics but suboptimal for intelligibility-sensitive downstream tasks. To address this gap, we propose SLM-SS, a token-based generative speech separation framework that models multi-talker mixtures with speech language models. We first discretize clean speech into multi-codebook token sequences with neural codecs and serialize multi-speaker targets via Serialized Output Training (SOT). An encoder-decoder autoregressive speech language model predicts the zero-order sequence to establish speaker ordering and coarse linguistic content, and a non-autoregressive module then refines higher-order residual codebooks for efficient reconstruction. We further introduce a per-talker non-autoregressive strategy that simplifies high-order modeling and improves the stability. On Libri2Mix, SLM-SS with per-talker NAR achieves 6.92% WER, approaching codec-only reconstruction. The WavTokenizer variant eliminates NAR refinement and achieves the highest mean subjective quality score among evaluated separation systems. Its UTMOS and DNSMOS advantages over discriminative baselines persist on unseen noisy and Chinese mixtures without fine-tuning.

Large-scale in-the-wild speech datasets have become more prevalent in recent years due to increased interest in models that can learn useful features from unlabelled data for tasks such as speech recognition or synthesis. These datasets often contain undesirable features, such as multiple speakers, non-target languages, and music, which may impact model learning. The Whilter model is proposed as a multitask solution to identify these undesirable samples. Whilter uses a Whisper encoder with an attention-based classifier to solve five diverse classification problems at once. In addition, an annotated dataset is published for a subset of two popular in-the-wild corpora. Whilter achieves F1 scores above 85% and equal error rates of 6.5% to 7.8% for three of five subtasks, outperforming a state-of-the-art BEATs classifier on speech-specific classes, with a notable decrease in processing time compared to a combination of single-task alternatives.

Target-guided response generation enables dialogue systems to smoothly transition a conversation from a dialogue context toward a target sentence. Such control is useful for designing dialogue systems that direct a conversation toward specific goals, such as creating non-obtrusive recommendations or introducing new topics in the conversation. In this paper, we introduce a new technique for target-guided response generation, which first finds a bridging path of commonsense knowledge concepts between the source and the target, and then uses the identified bridging path to generate transition responses. Additionally, we propose techniques to re-purpose existing dialogue datasets for target-guided generation. Experiments reveal that the proposed techniques outperform various baselines on this task. Finally, we observe that the existing automated metrics for this task correlate poorly with human judgement ratings. We propose a novel evaluation metric that we demonstrate is more reliable for target-guided response evaluation. Our work generally enables dialogue system designers to exercise more control over the conversations that their systems produce.

Speech foundation models, such as HuBERT and its variants, are pre-trained on large amounts of unlabeled speech data and then used for a range of downstream tasks. These models use a masked prediction objective, where the model learns to predict information about masked input segments from the unmasked context. The choice of prediction targets in this framework impacts their performance on downstream tasks. For instance, models pre-trained with targets that capture prosody learn representations suited for speaker-related tasks, while those pre-trained with targets that capture phonetics learn representations suited for content-related tasks. Moreover, prediction targets can differ in the level of detail they capture. Models pre-trained with targets that encode fine-grained acoustic features perform better on tasks like denoising, while those pre-trained with targets focused on higher-level abstractions are more effective for content-related tasks. Despite the importance of prediction targets, the design choices that affect them have not been thoroughly studied. This work explores the design choices and their impact on downstream task performance. Our results indicate that the commonly used design choices for HuBERT can be suboptimal. We propose approaches to create more informative prediction targets and demonstrate their effectiveness through improvements across various downstream tasks.

Unsupervised syllabic tokenization aims to learn discrete syllabic tokens that capture latent linguistic content-related structure from raw speech. Recent syllabic tokenization methods employ teacher-student distillation of the pretrained HuBERT to organize latent speech frame representations into syllabic segments. However, when trained with an utterance-level cross-entropy objective, the model predicts speaker identity rather than linguistic content, thereby compromising the purity of syllabic tokens. To address this problem, we propose a speaker-disentangled syllabic tokenizer that regresses speaker-perturbed student representations toward clean teacher targets within fixed-length chunks. Experimental results demonstrate that our proposed method achieves state-of-the-art performance in syllable boundary detection and syllabic segment clustering. Moreover, a speech language model trained on our syllabic tokens achieves a 7% relative improvement in syntactic and semantic understanding over the phone-level SpiRit-LM.

Discrete speech tokenizers aim to disentangle semantic from acoustic information, yet targets from self-supervised learning (SSL) models like HuBERT retain non-linguistic variation: speaker identity, prosody, and channel conditions leak into the tokens, inflating entropy. Our key insight is that when enough speakers utter the same words under varying conditions, linguistic content is the only shared factor. We propose PINT (Parallel INvariant Tokenization), which fine-tunes an SSL encoder with alignment losses across parallel utterances and augmentations to distill this shared residual. PINT collapses identical words onto consistent token sequences, drastically reducing conditional entropy. Unlike ASR text, PINT tokens preserve frame-level temporal grounding and serve as drop-in semantic targets for audio codecs. Experiments show a 98.7% relative reduction in speaker probe accuracy (93.1% to 1.2%), a 42% lower ABX error rate, and 27-30% lower LM perplexity versus baselines, confirming that the right invariance is key to efficient learning.

Recommendation dialogue systems aim to build social bonds with users and provide high-quality recommendations. This paper pushes forward towards a promising paradigm called target-driven recommendation dialogue systems, which is highly desired yet under-explored. We focus on how to naturally lead users to accept the designated targets gradually through conversations. To this end, we propose a Target-driven Conversation Planning (TCP) framework to plan a sequence of dialogue actions and topics, driving the system to transit between different conversation stages proactively. We then apply our TCP with planned content to guide dialogue generation. Experimental results show that our conversation planning significantly improves the performance of target-driven recommendation dialogue systems.

Low-bitrate speech communication on resource-constrained edge devices remains challenging due to stringent computational, memory, and bandwidth constraints. We present TinyCall, a lightweight neural audio codec designed for real-time speech communication on low-power platforms such as the ESP32 microcontroller and Raspberry Pi. The proposed system targets emergency communication and other bandwidth-limited scenarios while preserving speech intelligibility, speaker identity, and vocal expressiveness. To enable efficient deployment, we propose a minimal neural audio codec architecture together with a framework for converting a causally trained codec into a truly streamable codec through pseudo-lookahead decoding and decoder-input caching. We further replace conventional residual vector quantization (RVQ) with Residual Finite Scalar Quantization (RFSQ) to reduce inference complexity on edge processors and employ a progressive three-stage training strategy for stable optimization under latent quantization. An MFCC-based perceptual loss encourages preservation of speaker characteristics, including harmonic structure and vocal timbre. Experimental results demonstrate real-time operation on a Raspberry Pi 3 while achieving intelligible speech reconstruction at bitrates as low as 2.3 kbps. The proposed approach demonstrates that practical neural speech communication is feasible on highly resource-constrained edge devices.

We present Malafide, a universal adversarial attack against automatic speaker verification (ASV) spoofing countermeasures (CMs). By introducing convolutional noise using an optimised linear time-invariant filter, Malafide attacks can be used to compromise CM reliability while preserving other speech attributes such as quality and the speaker's voice. In contrast to other adversarial attacks proposed recently, Malafide filters are optimised independently of the input utterance and duration, are tuned instead to the underlying spoofing attack, and require the optimisation of only a small number of filter coefficients. Even so, they degrade CM performance estimates by an order of magnitude, even in black-box settings, and can also be configured to overcome integrated CM and ASV subsystems. Integrated solutions that use self-supervised learning CMs, however, are more robust, under both black-box and white-box settings.

Speech Language Models (SLMs) are increasingly deployed in multi-speaker environments, yet their ability to attribute speech to the correct speaker and reason over speaker identities remains unclear. Hence, we introduce HEAR, a conceptually hierarchical benchmark diagnosing the foundational capabilities of speaker-attributed reasoning, comprising 2.4K human-verified samples from 887 diverse multi-party audio clips. Evaluating 20 leading SLMs on HEAR reveals they struggle with these foundational tasks, often relying on semantic priors rather than actual vocal cues. To address this, we present A2R, a 30B model optimized on Counterfactual Audio with Speaker-level Hard negatives (CASH), a dataset designed to guide the model to prioritize acoustic vocal cues over linguistic signals. A2R achieves strong performance on HEAR and exhibits zero-shot generalization to diverse multi-speaker downstream tasks, demonstrating that learned speaker attribution unlocks the model's latent capacity for speaker-aware reasoning. All resources are available at https://attributetoreason.github.io/AttributeToReason/

Target-guided open-domain conversation aims to proactively and naturally guide a dialogue agent or human to achieve specific goals, topics or keywords during open-ended conversations. Existing methods mainly rely on single-turn datadriven learning and simple target-guided strategy without considering semantic or factual knowledge relations among candidate topics/keywords. This results in poor transition smoothness and low success rate. In this work, we adopt a structured approach that controls the intended content of system responses by introducing coarse-grained keywords, attains smooth conversation transition through turn-level supervised learning and knowledge relations between candidate keywords, and drives an conversation towards an specified target with discourse-level guiding strategy. Specially, we propose a novel dynamic knowledge routing network (DKRN) which considers semantic knowledge relations among candidate keywords for accurate next topic prediction of next discourse. With the help of more accurate keyword prediction, our keyword-augmented response retrieval module can achieve better retrieval performance and more meaningful conversations. Besides, we also propose a novel dual discourse-level target-guided strategy to guide conversations to reach their goals smoothly with higher success rate. Furthermore, to push the research boundary of target-guided open-domain conversation to match real-world scenarios better, we introduce a new large-scale Chinese target-guided open-domain conversation dataset (more than 900K conversations) crawled from Sina Weibo. Quantitative and human evaluations show our method can produce meaningful and effective target-guided conversations, significantly improving over other state-of-the-art methods by more than 20% in success rate and more than 0.6 in average smoothness score.

Smooth speaker transitions are fundamental to effective conversation and rely on an interlocutor's ability to predict when to enter the conversation. This ability depends on accurately interpreting and expressing the verbal and non-verbal cues that signal when a speaker wishes to take or relinquish the floor. The process becomes even more complex in noisy, natural, multi-party settings, with multiple interlocutors available. This study models how gaze and speech, together with perceived interpersonal closeness, signal conversational floor changes in free four-person dialogue. Using the GaMMA corpus, we trained logistic regression models using interpretable, behaviourally motivated features extracted before each turn-taking event to classify floor-transfer outcomes as gaps or overlaps. Predictors included gaze features such as transition motifs and behavioural contrasts, entropy, gaze-based addressee identity, and mutual gaze, alongside speech features derived from speaker loudness, as well as perceived interpersonal closeness (IOS) between speakers. Results show that gaze features capture predictive structure, and that combining them with loudness improves performance (ROC AUC = 0.76 +- 0.04). Loudness reflected speaker control, while gaze dispersion and addressing indexed listener readiness and competitive entry. Performance remained robust across noise conditions, indicating that gaze provides a complementary, noise-resilient cue to turn-taking dynamics.

With an evergrowing number of LLMs reporting superlative performance for English, their ability to perform equitably for different dialects of English (i.e., dialect robustness) needs to be ascertained. Specifically, we use English language (US English or Indian English) conversations between humans who play the word-guessing game of `taboo'. We formulate two evaluative tasks: target word prediction (TWP) (i.e.predict the masked target word in a conversation) and target word selection (TWS) (i.e., select the most likely masked target word in a conversation, from among a set of candidate words). Extending MD3, an existing dialectic dataset of taboo-playing conversations, we introduce M-MD3, a target-word-masked version of MD3 with the USEng and IndEng subsets. We add two subsets: AITrans (where dialectic information is removed from IndEng) and AIGen (where LLMs are prompted to generate conversations). Our evaluation uses pre-trained and fine-tuned versions of two closed-source (GPT-4/3.5) and two open-source LLMs (Mistral and Gemma). LLMs perform significantly better for US English than Indian English for both TWP and TWS, for all settings. While GPT-based models perform the best, the comparatively smaller models work more equitably for short conversations (<8 turns). Our results on AIGen and AITrans (the best and worst-performing subset) respectively show that LLMs may learn a dialect of their own based on the composition of the training data, and that dialect robustness is indeed a challenging task. Our evaluation methodology exhibits a novel way to examine attributes of language models using pre-existing dialogue datasets.

Recently, voice conversion (VC) without parallel data has been successfully adapted to multi-target scenario in which a single model is trained to convert the input voice to many different speakers. However, such model suffers from the limitation that it can only convert the voice to the speakers in the training data, which narrows down the applicable scenario of VC. In this paper, we proposed a novel one-shot VC approach which is able to perform VC by only an example utterance from source and target speaker respectively, and the source and target speaker do not even need to be seen during training. This is achieved by disentangling speaker and content representations with instance normalization (IN). Objective and subjective evaluation shows that our model is able to generate the voice similar to target speaker. In addition to the performance measurement, we also demonstrate that this model is able to learn meaningful speaker representations without any supervision.

Speaker anonymization seeks to conceal a speaker's identity while preserving the utility of their speech. The achieved privacy is commonly evaluated with a speaker recognition model trained on anonymized speech. Although this represents a strong attack, it is unclear which aspects of speech are exploited to identify the speakers. Our research sets out to unveil these aspects. It starts with kNN-VC, a powerful voice conversion model that performs poorly as an anonymization system, presumably because of prosody leakage. To test this hypothesis, we extend kNN-VC with two interpretable components that anonymize the duration and variation of phones. These components increase privacy significantly, proving that the studied prosodic factors encode speaker identity and are exploited by the privacy attack. Additionally, we show that changes in the target selection algorithm considerably influence the outcome of the privacy attack.

We describe a system that generates speaker-annotated transcripts of meetings by using a virtual microphone array, a set of spatially distributed asynchronous recording devices such as laptops and mobile phones. The system is composed of continuous audio stream alignment, blind beamforming, speech recognition, speaker diarization using prior speaker information, and system combination. When utilizing seven input audio streams, our system achieves a word error rate (WER) of 22.3% and comes within 3% of the close-talking microphone WER on the non-overlapping speech segments. The speaker-attributed WER (SAWER) is 26.7%. The relative gains in SAWER over the single-device system are 14.8%, 20.3%, and 22.4% for three, five, and seven microphones, respectively. The presented system achieves a 13.6% diarization error rate when 10% of the speech duration contains more than one speaker. The contribution of each component to the overall performance is also investigated, and we validate the system with experiments on the NIST RT-07 conference meeting test set.

Speech-guided referring video object segmentation aims to recover the mask tracks of objects specified by a spoken motion description. Here, speech carries a linguistic instruction rather than acoustic evidence from a sounding object, so a solution must connect speech recognition, motion-centric temporal grounding, mask tracking, and explicit no-target handling. We introduce Speech2MaskTrack, our approach for the MeViS-Audio track of the 8th LSVOS Challenge. Speech2MaskTrack transcribes the spoken query and compiles it into structured constraints over category, count, direction, interaction role, and temporal phase. SAM3.1 enumerates multiple instance tracks, which TRACE ranks using complete-trajectory motion and relation evidence. A frozen lexical presence gate may suppress the ranked SAM3.1 base prediction. When the gate predicts that a target is present, an available full-expression-conditioned SaSaSa2VA track replaces the SAM3.1 mask. Only outputs that remain empty enter GPT-assisted recovery, which invokes SaSaSa2VA again under query- and mask-level verification. Speech2MaskTrack achieved second place in the official challenge ranking.

This document provides a brief description of the National Institute of Standards and Technology (NIST) speaker recognition evaluation (SRE) conversational telephone speech (CTS) Superset. The CTS Superset has been created in an attempt to provide the research community with a large-scale dataset along with uniform metadata that can be used to effectively train and develop telephony (narrowband) speaker recognition systems. It contains a large number of telephony speech segments from more than 6800 speakers with speech durations distributed uniformly in the [10s, 60s] range. The segments have been extracted from the source corpora used to compile prior SRE datasets (SRE1996-2012), including the Greybeard corpus as well as the Switchboard and Mixer series collected by the Linguistic Data Consortium (LDC). In addition to the brief description, we also report speaker recognition results on the NIST 2020 CTS Speaker Recognition Challenge, obtained using a system trained with the CTS Superset. The results will serve as a reference baseline for the challenge.

This paper presents Att-HACK, the first large database of acted speech with social attitudes. Available databases of expressive speech are rare and very often restricted to the primary emotions: anger, joy, sadness, fear. This greatly limits the scope of the research on expressive speech. Besides, a fundamental aspect of speech prosody is always ignored and missing from such databases: its variety, i.e. the possibility to repeat an utterance while varying its prosody. This paper represents a first attempt to widen the scope of expressivity in speech, by providing a database of acted speech with social attitudes: friendly, seductive, dominant, and distant. The proposed database comprises 25 speakers interpreting 100 utterances in 4 social attitudes, with 3-5 repetitions each per attitude for a total of around 30 hours of speech. The Att-HACK is freely available for academic research under a Creative Commons Licence.

We introduce SPEAR-TTS, a multi-speaker text-to-speech (TTS) system that can be trained with minimal supervision. By combining two types of discrete speech representations, we cast TTS as a composition of two sequence-to-sequence tasks: from text to high-level semantic tokens (akin to "reading") and from semantic tokens to low-level acoustic tokens ("speaking"). Decoupling these two tasks enables training of the "speaking" module using abundant audio-only data, and unlocks the highly efficient combination of pretraining and backtranslation to reduce the need for parallel data when training the "reading" component. To control the speaker identity, we adopt example prompting, which allows SPEAR-TTS to generalize to unseen speakers using only a short sample of 3 seconds, without any explicit speaker representation or speaker-id labels. Our experiments demonstrate that SPEAR-TTS achieves a character error rate that is competitive with state-of-the-art methods using only 15 minutes of parallel data, while matching ground-truth speech in terms of naturalness and acoustic quality, as measured in subjective tests.

For a large portion of real-life utterances, the intention cannot be solely decided by either their semantic or syntactic characteristics. Although not all the sociolinguistic and pragmatic information can be digitized, at least phonetic features are indispensable in understanding the spoken language. Especially in head-final languages such as Korean, sentence-final prosody has great importance in identifying the speaker's intention. This paper suggests a system which identifies the inherent intention of a spoken utterance given its transcript, in some cases using auxiliary acoustic features. The main point here is a separate distinction for cases where discrimination of intention requires an acoustic cue. Thus, the proposed classification system decides whether the given utterance is a fragment, statement, question, command, or a rhetorical question/command, utilizing the intonation-dependency coming from the head-finality. Based on an intuitive understanding of the Korean language that is engaged in the data annotation, we construct a network which identifies the intention of a speech, and validate its utility with the test sentences. The system, if combined with up-to-date speech recognizers, is expected to be flexibly inserted into various language understanding modules.